Page 1 of 1
Marina Diff, is it interchangable?
Posted: Wed Dec 20, 2006 8:33 pm
by Matt
Ok, this new trav of mine has all marina running gear. I have no problem with the rear axle, but is the diff in it interchangeable with minor ones?
Posted: Wed Dec 20, 2006 8:47 pm
by bmcecosse
Think it's a completely different beast Matt.
Posted: Wed Dec 20, 2006 8:47 pm
by bmcecosse
Think it's a completely different beast Matt.
Posted: Wed Dec 20, 2006 8:57 pm
by wanderinstar
Seem to remember someone saying Marina diff was Triumph based, or was it gearbox.
Posted: Wed Dec 20, 2006 8:58 pm
by Matt
Well the fact its different has been confirmed elsewhere....
Posted: Thu Dec 21, 2006 7:25 pm
by bmcecosse
And is it Triumph = Dolomite rwd range ?
Posted: Thu Dec 21, 2006 11:50 pm
by Packedup
Gearbox and back axle are Dolomite/ 1500TC based (not Sprint though) - Or the Dolomite gearbox is Marina based (I think that's the right way round for that part, the early Dolomites had a three rail, later had a single rail which I think the Marina had earlier).
As far as I know the TR7 uses the same diff, and probably other Triumphs in different housings. Should give you a few fairly cheap options for ratios if that was what you were thnking, as the same axle casing was used from 1300 up to 1850HL, with a couple of automatics in the range too
