windscreen
Posted: Tue Dec 05, 2006 8:57 am
Hiya all,are the inserts and clips for the windscreen trim available?Mine seem to have vanished during the rebuild,a bit like socks in the washing machine!!All the best,John.
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
windscreen
Page 1 of 1
Posted: Tue Dec 05, 2006 5:58 pm
If you are talking about the insert, sadly not
Posted: Sat Jun 30, 2007 8:12 pm
Trying to source these for ages. I would suggest this is possibly the most difficult part to get on the whole car, as rare as hens teeth.
Have been advised by Charlie Wares spares dept to try Minor spares supliers in Australia as they exported a lot down under and therefore maybe more about.
Phil
Have been advised by Charlie Wares spares dept to try Minor spares supliers in Australia as they exported a lot down under and therefore maybe more about.
Phil
Posted: Sat Jun 30, 2007 9:21 pm
Are we on about the outer chrome insert or the inner painted cover trim that was fitted to the early models? 
Posted: Wed Jul 04, 2007 8:28 am
Its the outer chrome inserts I am looking for.
Posted: Thu Jul 05, 2007 4:12 am
Is this the stainless strip that goes into the windscreen seal from the outside?
Did all cars have these?
I have three for some reason somewhere in my shed, was planning to use two on my car if they are appropriate to the year. I am however missing the joiners that go in the middle.
The strips were easy enough for me to find in Aus.
Did all cars have these?
I have three for some reason somewhere in my shed, was planning to use two on my car if they are appropriate to the year. I am however missing the joiners that go in the middle.
The strips were easy enough for me to find in Aus.
Posted: Fri Jul 06, 2007 6:47 am
Yes it is the strips that go in the windscreen rubber.Mine are chrome on brass and I too am missing the small sealing caps.All the best,John.P.S.mine is a "52.
Posted: Fri Jul 06, 2007 7:31 am
Posted: Fri Jul 06, 2007 11:31 am
I'll keep my eyes open for some of the joiners then.
I have come across them from time to time.
Should my 1950 MM have them and the strips?
I have come across them from time to time.
Should my 1950 MM have them and the strips?