Page 1 of 1

Flasher unit wiring...

Posted: Sat Aug 19, 2006 3:13 pm
by Matt
Hi Guys/Gals

Im having a problem with my flasher units on the 1926 lorry... (its using flasher units that look the same as the one from the minor/spridet etc...)

Would someone please tell me where I should connect the following terminals

B/X
P
L

Thanks!

Matt

flasher

Posted: Sat Aug 19, 2006 4:38 pm
by Willie
B= battery , P-=Pilot lamp, L = to the indicator switch centre contact. In case you are not aware when testing it it will not flash unless you have TWO 21w bulbs connected to each side. I assume that your old lorry is now 12v?

Posted: Sat Aug 19, 2006 6:45 pm
by Matt
Yup 12v, and it works fine with 1 x 21W bulb + the tell tale :s

thanks!

Posted: Sat Aug 19, 2006 8:18 pm
by jtd.75
been down that road my self without realising that I need 2 bulbs for the indies to work :oops: :oops: :(
jimmy