Page 1 of 1
Mini part and LPG vapouriser
Posted: Fri Jul 14, 2006 11:08 am
by JustinMinor1000
If I fit this part ..
http://www.minispares.com/Product.aspx?pid=37401
Then I assume I get hot water out of it .. Do we think this would run an LPG vapouriser ?
Posted: Fri Jul 14, 2006 5:36 pm
by wanderinstar
Hi Justin,
I should think that would do the job perfectly. I run on Lpg but I have teed off heater hose, trouble is I have to have heater on in summer.
Do you have LPG fitted yet or just thinking about it.
Ian.
Posted: Fri Jul 14, 2006 7:27 pm
by JustinMinor1000
wanderinstar wrote:Hi Justin,
I should think that would do the job perfectly. I run on Lpg but I have teed off heater hose, trouble is I have to have heater on in summer.
Do you have LPG fitted yet or just thinking about it.
Ian.
Sort of planning really .. I have an LPG conversion on the Landrover ..
Max is being rebuilt and I am going to build the conversion into the car. I was trying to work out how to not have the heater on all summer ..
There is another Mini part that just goes directly from the head to a hose and then I was going to T and then use a "Hose -Hose" valve of a similar type. However this option seems way way better (if only because there is less hose) ...