Page 1 of 1
door checks!
Posted: Sat Jul 08, 2006 4:56 pm
by markattard
Anyone please know the sequence of buffer-washers -grommets that goes in a 2 door Moggie? maybe some kind of diagram helpful?
Posted: Sat Jul 08, 2006 10:28 pm
by les
Put the rubber buffer on then the large washer then the nut. The rubber is there to absorb the shock so needs to be against the door.
Posted: Mon Jul 10, 2006 8:41 am
by markattard
thanks les
Posted: Mon Jul 10, 2006 1:03 pm
by simmitc
Note that there should be two nuts so that they lock together, just one may undo itself. Depending on the model, there may be one or two rubber buffers.
Posted: Wed Jul 12, 2006 9:14 pm
by les
There are two different lengths of door checks, could it be that two buffers were used on the longer check to make it 'shorter'