Morris Minor Owners Club

hello i'm new to this so bear with me please.
i've just bought a minor convertible 1970 that needs alot of welding and complete restoration.
i'm in wolverhampton does anyone know where i can get the panels from.
also one main proiblem is on the drivers side thge body has dropped in the middle so the door doesn't shut and is quite low the sills are rotten so hopefully they will strentghten it up but how do i do it any ideas please and thankyou
steve

The only thing holding the convertible together is the sill assembly beneath
the doors. It is quite a complicated section and needs very careful positioning
of the body before the new sections are welded in place. The convertible also
has extra strengthening inside the sills although it is possible to fit an 'oversill'
section inside the car to restore missing strength. You would be well advised
to research the rebuilding proceedure thoroughly before you start. All the
necessary sections are available from many Minor specialists. If the sills are
rotten then you will probably find that the door posts and inner wing areas are
also in a poor state. As a rough guide, one advertiser rebuilds the floors,
sills,rear spring hangars etc for £999.00!!

Steve, there is a Minor parts place in Oldbury (Morris Minor Centre Birmingham), http://www.morrisminor.co.uk/index.htm but to be honest, I was not very impressed with the quality of the panels that they stock. If I were you, I'd mail order from ESM http://www.morrisminorspares.co.uk/ or Bull Motif http://www.morrisminorspares.net/