Page 1 of 1
Mastic? for fiting front wings.
Posted: Wed Apr 26, 2006 8:20 pm
by FlyingScot
Could anyone suggest a good prodict to put between a front wing ant the inner wing before you bolt them together?
Ta.
seal
Posted: Wed Apr 26, 2006 9:03 pm
by Willie
I used a product called 'Arboseal' which comes as a 1/2" wide 1/8th"thick
coil which is long enough for quite a few wings! It is available from 'Minor
Developments' on 01562 747718
Posted: Wed Apr 26, 2006 11:50 pm
by FlyingScot
Thanks.
Steve
Posted: Thu Apr 27, 2006 9:05 pm
by Onne
I have learnt the end bit where it attaches is actually a drainage hole. I wonder why they discontinued the piping for the front wings. My MM has them.
Posted: Thu Apr 27, 2006 11:35 pm
by bigginger
http://www.morrisdownunder.com/forum/vi ... php?t=1525 is where the person who told you got that bit of info from. I expect
Posted: Fri Apr 28, 2006 8:41 am
by Onne
no, actually it was an English person whom you might know
Posted: Fri Apr 28, 2006 12:06 pm
by bigginger
Still where it came from, I'd say
Posted: Sat Apr 29, 2006 10:44 pm
by newagetraveller
I use black roof and gutter sealant.
Posted: Sun Apr 30, 2006 7:07 pm
by stevey
Yeh i used unibond black sealent. Form B&Q. I did try black roof sealent, but make sure it is the type that dries. It took a lot of scraping out!!!!
Posted: Mon May 01, 2006 12:28 am
by Scott
bigginger wrote:Still where it came from, I'd say
Am I in trouble..............
..........again ??
On an everyday type car, I prefer to use piping between the front wings & body. It's a lot easier to carry out "minor" adjustments that usually seem to be needed.
Posted: Mon May 01, 2006 12:39 am
by bigginger
I don't think so
It was something I was interested to learn, and so passed on
I'd wondered for years why it was designed so that a puddle collected there.