Marina disc brake hoses. Help!

Post by **WPR678B** » Sat Apr 22, 2006 10:23 pm

Can anyone help me? I have a Marina disc brake set up on my pick up and am in need of new flexible brake hoses. I used the Owen Burton kit when i fitted them and have no idea where to get replacement hoses from to suit! Anyone know where they can be purchased or if the kit used a standard hose from another car and if so which? Thanks in advance for your help!

Post by **aupickup** » Sat Apr 22, 2006 10:54 pm

you can get them from esm , they sell all the individual parts for the marina set up

http://shop.morrisminorspares.co.uk/ind ... 5f24f09f0a

that is the link to there spares page for them

Post by **WPR678B** » Sun Apr 23, 2006 8:47 am

Many thanks! I was hoping someone out there would know!

Post by **aupickup** » Sun Apr 23, 2006 8:52 am

you are more than welcome.
i have the marina set up. and find them good

Post by **WPR678B** » Sun Apr 23, 2006 9:02 am

Order has been placed! Thanks again.

Post by **aupickup** » Sun Apr 23, 2006 9:06 am

Post by **bigginger** » Sun Apr 23, 2006 8:12 pm

I found that these pipes ended up too close to the kingpin for comfort, and ended up moving the right angled plate at the car end upwards so that they didn't rub on the king pin - but I'm paranoid

.

Post by **WPR678B** » Mon Apr 24, 2006 8:22 pm

Hopefully these hoses will be the same length as the original one's that were supplied with the kit that i got from Owen Burton all those years ago, in which case they will be fine as i have done many miles with them! Was just in need of replacements as i managed to shear a pipe off in one of them!

Post by **bigginger** » Mon Apr 24, 2006 8:39 pm

Yup, mine were to replace Goodridge hoses from C Ware, which were longer. As I say, probably me just being over cautious - but I try to be with brakes