Wing variations .... ?!

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
rdlh
Minor Friendly
Posts: 18
Joined: Tue Nov 09, 2004 5:46 pm
Location: Thame, Oxfordshire
MMOC Member: No

Wing variations .... ?!

Post by rdlh »

Hello,
Could anyone offer me some advice please regarding variations in wings.
I have a 1969 2 door saloon &, from variou ssources, have bought 4 replacement wings.
When going to fit these I have found that although I can fit one of the rears (drivers side), none of the others fit.
The new front wings are (when stood on the ground) slightly taller then the old & the section around the front grill is different.
I know the rears can need some "encouragement" to fit, but the front section (by the sill) appears different.
I am now looking for some replacement - for my replacement ! - wings but want to be quite sure that I do actually buy the right thing this time.
Yes, I know I could go to a recognised trader & buy genuine wings, but I am also trying to do this as inexpensively as possible !
Many thanks.
Richard
brixtonmorris
Minor Addict
Posts: 754
Joined: Fri Apr 16, 2004 10:10 pm
Location: london
MMOC Member: Yes

Post by brixtonmorris »

those wings are patten wing, not sure about the height differance, but the part sticking out at the front on the front wings will need to be cut and reshaped,. some patten rear wings also have a similar issue at the bottom near bumper irons.
very annoying if you paint the wing before the car arrives at the garage,.
sometimes its better to pay the higher price wings, as the money saved with patten one is lost in the labour reshaping them.
sometimes it better to by good used ones, rather then buy these cheap ones, at least you know they fit. trouble is, youve got to find good used ones.
a magnet is a good tool for finding good used wings.
rayofleamington
Moderator
Moderator
Posts: 7679
Joined: Fri Nov 01, 2002 2:55 pm
Location: LEAMINGTON SPA
MMOC Member: No

Post by rayofleamington »

rdlh,
Just be glad your complete set of wings had 2 fronts and 2 rears.
I collected the 'complete set of wings in excellent condition' (advertised in for sale section) recently to find they were quite rusty and there was only 1 front wing!! :(
Ray. MMOC#47368. Forum moderator.

Jan 06: The Minor SII Africa adventure: http://www.minor-detour.com
Oct 06: back from Dresden with my Trabant 601 Kombi
Jan 07: back from a month thru North Africa (via Timbuktu) in a S3 Landy
June 07 - back from Zwickau Trabi Treffen
Aug 07 & Aug 08 - back from the Lands End to Orkney in 71 pickup
Sept 2010 - finally gave up breaking down in a SII Landy...
where to break down next?
2013... managed to seize my 1275 just by driving it round the block :(
rdlh
Minor Friendly
Posts: 18
Joined: Tue Nov 09, 2004 5:46 pm
Location: Thame, Oxfordshire
MMOC Member: No

Post by rdlh »

Thanks for the replies & advice.
Having looked again, and with a little encouragement, the wings are now fitted & the car is looking good.
So good in fact that I am ow beginning to question my previous decision of selling the car when completed .... !!

Richard
Cam
Moderator
Moderator
Posts: 5109
Joined: Mon May 20, 2002 1:00 am
Location: Stoke-on-Trent, Staffordshire, UK
MMOC Member: No

Post by Cam »

Richard,

Why not drive the car and enjoy it for a while if you don't HAVE to sell it. You can always sell it afterwards for the same price. :D
rdlh
Minor Friendly
Posts: 18
Joined: Tue Nov 09, 2004 5:46 pm
Location: Thame, Oxfordshire
MMOC Member: No

Post by rdlh »

Cam,
When I bought my Traveller 2 yrs ago, it was on the condition (from my wife !) that I sell saloon. I have been postponing this by telling her "The market isn't right at the moment" & have been enjoying the car !
However, as I also have 2 old Land Rovers which require using, common sense does say sell saloon & really Traveller as well .... obviously when the market is right, one cannot rush into such decisions !
Richard
Post Reply