Useful info, thanks. I bought a complete new fuel line from ESM - flared end pipe with nut. As far as I can tell it sealed ok - where did you get your pipe?IslipMinor wrote:'Stag36587'
What do you have as the connection between the fuel line and the tank? The connection fulfills two functions - the first is to connect the fuel line to the tank, and the second, and separate one, is to make a sealed connection between the fuel line and the pick-up tube inside the tank.
Wont start after rebuild!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
stag36587
- Minor Legend
- Posts: 1395
- Joined: Sat Jan 06, 2007 3:55 pm
- Location: Raunds, Northamptonshire
- MMOC Member: No
Re: Wont start after rebuild!
]
-
IslipMinor
- Minor Legend
- Posts: 2147
- Joined: Mon May 10, 2004 9:10 pm
- Location: Oxford, UK
- MMOC Member: Yes
Re: Wont start after rebuild!
Either Beaulieu or the NEC at some point during the restoration, so that when I came to fit it, it was too late to take it back (not even sure I would have known where!).
The nut should be around 20mm long up to the end flare.
The nut should be around 20mm long up to the end flare.
Richard
