Blowing fuses… help!

Discuss anything Morris Minor related.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
User avatar
geoberni
Minor Maniac
Posts: 5336
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Blowing fuses… help!

Post by geoberni »

I concur with Stephen.

There's a good article written in 2007 about hydraulically operated Brake Light Switches, specifically those fitted to classic Volvo models.
Being an American article it does have some amusing DIY solutions to installing alternative switches, something they could/can get away with since few US States have any form of vehicle inspection regime. :o

https://www.sw-em.com/hydraulic%20brake ... 0notes.htm

Interestingly, a 2016 article in Minor Matters, which is reproduced on the Dorset Branch website uses the same illustrations..... :wink:
https://dorsetmmoc.co.uk/website_7023d1 ... chfail.pdf
Basil the 1955 series II

Image
User avatar
svenedin
Minor Legend
Posts: 4972
Joined: Fri Aug 29, 2014 9:27 am
Location: Surrey
MMOC Member: Yes

Re: Blowing fuses… help!

Post by svenedin »

Good Minor Matters article but what it doesn't show or illustrate is that the original Lucas switches had a very different internal design and they lasted for decades without issue. These old switches did "snap" shut thus minimising any potential for internal arcing.

https://mgaguru.com/mgtech/electric/et119g.htm

Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.

Stephen
mrs.smith2012
Minor Addict
Posts: 502
Joined: Wed Sep 17, 2025 6:19 pm
Location: Essex
MMOC Member: Yes

Re: Blowing fuses… help!

Post by mrs.smith2012 »

So just to clarify, my switch is at fault and the wiring it probably okay? Or is it possible there is issue with the wiring hence why the switch has failed?

I really appreciate everyone’s advice on this, and I shall take a look at those articles attached :tu1:
Post Reply