Page 3 of 3
Re: Rear gearbox seal
Posted: Wed May 10, 2023 1:04 pm
by Classiccars
Thank you Phil.I can understand its confusing as I am not very mechanically savvy.Just one final question regarding possible adjustment if the piston increased it is just that.Can you please advise how to adjust as have no idea.Also will the threaded piece become longer or shorter if u am going the correct was please
Re: Rear gearbox seal
Posted: Wed May 10, 2023 1:05 pm
by Classiccars
Piston picture
Re: Rear gearbox seal
Posted: Wed May 10, 2023 4:59 pm
by philthehill
Shorten the distance between the slave cylinder and release arm by loosening the nuts on the threaded rod and screwing them back towards the slave cylinder until you have the necessary clearance. Lock the two nuts together and re check the clearance.
Re: Rear gearbox seal
Posted: Wed May 10, 2023 7:01 pm
by Classiccars
Thanks very much.Will try that first
Re: Rear gearbox seal
Posted: Sat May 13, 2023 4:39 pm
by Classiccars
Great news on one front.Worked on the piston for the clutch and no more slipping so hopefully has saved me on a clutch and parts.