Page 3 of 3
Re: Fitting a brake reservoir / header tank
Posted: Fri Mar 26, 2021 7:51 pm
by pgp001
That one actually says it is not suitable for use with Silicone fluid.
Phil P
Re: Fitting a brake reservoir / header tank
Posted: Fri Mar 26, 2021 8:07 pm
by philthehill
So it does.
It would be nice to know why it is not suitable for silicon brake fluid.
If the plastic pipe is the problem just change the plastic pipe to the pipe listed below and all will be well.
https://www.merlinmotorsport.co.uk/p/7m ... m-m-sph8-4
Re: Fitting a brake reservoir / header tank
Posted: Sat Mar 01, 2025 10:27 am
by Calva
Declan, 8 years later! Is your reservoir kit for the MM still available? Thanks, George (Calva)
Re: Fitting a brake reservoir / header tank
Posted: Mon Mar 03, 2025 12:11 pm
by Declan_Burns
It is indeed, and updated over the past few years!
Here is a photo of the kit. It is also available with the metal can as an alternative.
Regards
Declan
Re: Fitting a brake reservoir / header tank
Posted: Mon Mar 03, 2025 7:23 pm
by svenedin
Beautiful system Declan. Bravo!
Stephen
Re: Fitting a brake reservoir / header tank
Posted: Thu Mar 06, 2025 10:02 pm
by stuupnorth
hi declan
could you send me the price of this great bit kit please
Declan_Burns wrote: ↑Mon Mar 03, 2025 12:11 pm
It is indeed, and updated over the past few years!
Here is a photo of the kit. It is also available with the metal can as an alternative.
Regards
Declan
Re: Fitting a brake reservoir / header tank
Posted: Fri Mar 07, 2025 12:16 pm
by Declan_Burns
For further information, please contact me offline at one of the following email addresses:
declan_burns@web.de
declan underscore burns at web dot de
Regards
Declan