Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:27 pm
Undercoat.[frame]
[/frame]
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Series 2 splitscreen 1954
Page 3 of 3
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:27 pm
That is amazing!
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:29 pm
New springs and brakes.used some more old paint on arches and painted axle.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:30 pm
[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:31 pm
Master cylinder.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:32 pm
Wings welded up and repaired.original ones.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:34 pm
Gearbox back in after inspection.and a quick spray.you can also see the new wiring loom going in.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:38 pm
Dreaded roof lining.I had no support bars and couldn't get any from anywhere so I used 4mm carbon fibre rods from a kite shop and drilled hole in the ends for the cable wire.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:39 pm
[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:39 pm
[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:42 pm
[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:42 pm
Wire in place ready to go in.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:44 pm
Glued laminate floor underlay to roof for extra sound proof.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:45 pm
Few crease to pull out but it's in and tension put on cables back and front.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:47 pm
[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Mon Apr 27, 2015 10:55 pm
Engine back in.quick paint job and a few new parts.[frame]
[/frame]
Re: Series 2 splitscreen 1954
Posted: Tue Apr 28, 2015 7:56 am
Well done. An extraordinary achievement. Most of us would have given up! Actually, most would not have even started 
You must have had great determination. Your panel supplier must have loved you!
Hope you are now able to get pleasure from using the car on the road where it belongs
You must have had great determination. Your panel supplier must have loved you!
Hope you are now able to get pleasure from using the car on the road where it belongs
Re: Series 2 splitscreen 1954
Posted: Tue Apr 28, 2015 4:54 pm
Really super job!! Ive never saw anyone replace the crossmember on the bulkhead before, the car must of stood for a seriously long time. It goes to show what can be done with any minor with some serious dtermination.
Hope to see you at some of the shows to get a look
Hope to see you at some of the shows to get a look