Page 3 of 3

Re: Mazda MX5 engine conversion

Posted: Sun Jan 20, 2013 2:20 pm
by Innovator
The mx5 engine is quite long so would require bulkhead mods.

I do know of a Minor being built with a mx5 engine box and also the suspension.

Re: Mazda MX5 engine conversion

Posted: Sun Jan 20, 2013 8:55 pm
by MarkyB
Replacing the coil must have cured the real problem then as it ran on all 3 afterwards :)

Re: Mazda MX5 engine conversion

Posted: Sun Jan 20, 2013 11:19 pm
by bmcecosse
:lol: :roll:

Re: Mazda MX5 engine conversion

Posted: Mon Jan 21, 2013 1:48 am
by don58van
Just FYI, I know of a chap fitting an MX5 to a Minor down here in Oz.

However ... the Minor is fitted with a Mazda Ute chassis!

If you are a member of the Morris Downunder site, you can have a look.

Cheers
Don

Re: Mazda MX5 engine conversion

Posted: Tue Jan 22, 2013 1:01 pm
by rayofleamington
There's a bloke in my street that's got a Trabi.. ;-)

2 cylinder, but not so different from the Warty as it's 2 stroke. Not much use compared to an MX-5 engine though.