2008 LEO (Lands End to Orkney) Run
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 61
- Joined: Wed Aug 15, 2007 7:21 pm
- Location: Manchester
- MMOC Member: No
when we get there 

Steam enthusiast, owner of 2 Morris minors and hes only 24
Prowed Owner of
Moggy 1964 Rose Taupe Morris Traveller ATY 243 B
Trevor 1964 Trafalgar Blue Morris Traveller PRX 220 B (under restoration)
KGC Engineering, Heritage Transport Restoration and Maintenance 07879 368 181 kgcengineering@hotmail.co.uk
- ndevans
- Minor Legend
- Posts: 1128
- Joined: Fri Mar 03, 2006 11:56 am
- Location: Bristol, England
- MMOC Member: Yes
2 thoughts:-Judge wrote:This year instead of having an 'official' photograph taken, I was planning to use the website banner (hence my post yesterday) combined with a home made one showing the relevent information.
1 How about devising some sort of Rally Plaque, like those seen on '60's rallys like the Monte Carlo, or Tulip? Perhaps laminated paper which we could attache to a bumper?
2 When we get to Scrabster, how about a gruop photo with our cars lined up in fron of the boat? This might be appreciated by the ferry company in return for the discount crossings.
cheers,
Neil
cheers N
'69 Traveller, 1275, discs.
'69 Traveller, 1275, discs.
We used to have this type of rally plaque for the MOT, but they are very costly to produce. However if someone wants to come up with a design and produce it, I'm very much in favour.
I have mentioned the ferry companies generosity in various correspondence, but I think this is a very good idea. I will discuss the possibilities directly with the company and keep you posted.
I have mentioned the ferry companies generosity in various correspondence, but I think this is a very good idea. I will discuss the possibilities directly with the company and keep you posted.
Bill Hewlett
Oxon & Berks Branch Chairman - MOT-UK Organiser (see http://www.blurb.com/books/1518384 and http://www.blurb.com/books/2422813)
Oxon & Berks Website: http://www.bucksinfo.net/mogbox/
Oxon & Berks Branch Chairman - MOT-UK Organiser (see http://www.blurb.com/books/1518384 and http://www.blurb.com/books/2422813)
Oxon & Berks Website: http://www.bucksinfo.net/mogbox/
-
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No
I'm working on small window stickers (in my copious free time!) and have considered making plaques of the sort you describe for the AIR. I can do A4 laminated sheets easily. Can you point me at some photos of plaques that have been used at past events? I suppose I could just do a blown-up version of the window sticker design.


Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
-
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No
So you want it to look like this?

Looks very simple to do. How wide are they? Do you put them on both front and back of each car?
I'm guessing there's some reason for making them that particular shape...

Looks very simple to do. How wide are they? Do you put them on both front and back of each car?
I'm guessing there's some reason for making them that particular shape...


Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
They're the ones
Usually have two small holes at either side for attaching to the car. About 12" X 7" should be about right.

Bill Hewlett
Oxon & Berks Branch Chairman - MOT-UK Organiser (see http://www.blurb.com/books/1518384 and http://www.blurb.com/books/2422813)
Oxon & Berks Website: http://www.bucksinfo.net/mogbox/
Oxon & Berks Branch Chairman - MOT-UK Organiser (see http://www.blurb.com/books/1518384 and http://www.blurb.com/books/2422813)
Oxon & Berks Website: http://www.bucksinfo.net/mogbox/
-
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No
It would have to be 11.5" then - A4 is the biggest I can do.


Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
I have contacted the ferry company, and have been advised that with the quick turnround time and check in not being beside the boat, it may be difficult. However if we can find somewhere, it shouldn't present a problem.ndevans wrote:When we get to Scrabster, how about a gruop photo with our cars lined up in fron of the boat? This might be appreciated by the ferry company in return for the discount crossing.
Bill Hewlett
Oxon & Berks Branch Chairman - MOT-UK Organiser (see http://www.blurb.com/books/1518384 and http://www.blurb.com/books/2422813)
Oxon & Berks Website: http://www.bucksinfo.net/mogbox/
Oxon & Berks Branch Chairman - MOT-UK Organiser (see http://www.blurb.com/books/1518384 and http://www.blurb.com/books/2422813)
Oxon & Berks Website: http://www.bucksinfo.net/mogbox/
- ndevans
- Minor Legend
- Posts: 1128
- Joined: Fri Mar 03, 2006 11:56 am
- Location: Bristol, England
- MMOC Member: Yes
Just the site I was looking at earlier!alex_holden wrote:So you want it to look like this?
Looks very simple to do. How wide are they? Do you put them on both front and back of each car?
I'm guessing there's some reason for making them that particular shape...
Another is
http://www.jimpike.co.uk/id44.html
This has larger photos.
Alex I will happily give you some money for a plaque if you can rustle some up. I currently don't have a printer.
We could even have car numbers on them to make it more realistic!
Thanks for contacting Northlink Bill-I suspected they might have a problem with space & turnround times, but I reckon we should be able to do something.
cheers,
Neil
cheers N
'69 Traveller, 1275, discs.
'69 Traveller, 1275, discs.
-
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No
I see. The Monte Carlo one is a slightly different shape.

How do you allocate the car numbers?

How do you allocate the car numbers?


Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
All in the master plan Neil, all in the master planndevans wrote:Another thought regarding photos-we ought to try to get a group photo with every car that is joining us for part of the journey, ie the 10 or so that are going the whole way plus every car that joins for a day or so.


Bill Hewlett
Oxon & Berks Branch Chairman - MOT-UK Organiser (see http://www.blurb.com/books/1518384 and http://www.blurb.com/books/2422813)
Oxon & Berks Website: http://www.bucksinfo.net/mogbox/
Oxon & Berks Branch Chairman - MOT-UK Organiser (see http://www.blurb.com/books/1518384 and http://www.blurb.com/books/2422813)
Oxon & Berks Website: http://www.bucksinfo.net/mogbox/
-
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No


I'm not sure if it would work better with the Land's End - Orkney bit under the car number instead.


Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
-
- Minor Legend
- Posts: 3798
- Joined: Tue Jul 25, 2006 9:46 am
- Location: Burnley
- MMOC Member: No
Alternatively I could enlarge the rectangular part downwards and put LAND'S END - ORKNEY underneath RALLYE MORRIS-MINOR. I think "MANILUX - MARSEILLE" might actually have been the name of the manufacturer...


Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.