Morris Minor Owners Club

Thabkyou probobally more now i changed all 6 bolts and have smaller heads than the 4 that were in there
Really appreciate tge help. Ta
Ps the engine /flywheel/clutch all came as package from running driving a40 hence the wrong manifold for moggie
The dowell holes not line up so suspect fly been redrilled or Esm jobbie
Fact it came from running car lends itself to it all being compatable

If your that worried drill the bolt heads and lockwire them

Ooh theres a thought! Many thanks for that
Seen it on aircraft
Going to fold tabs on plate see if doable
Cannot wait to get it fitted

most modern cars use loctite bolts on the flywheel, can't see why it wouldn't work on this too but lock wiring would be a good belt and braces measure. I've got a Maestro engine on the stand in the garage I started looking at fitting to our minor, I don't think it's got any dowels, just six bolts on a 65mm pcd with one offset. I was looking at fitting a mx5 gearbox, the mx5 flywheel is also 65mm pcd, so bolts on, plan was to skim the maestro backplate by around 8mm then fit a adaptor plate, other things got it the way but one day I will return to it.