Page 2 of 2
Posted: Fri Jul 14, 2006 1:40 pm
by bigginger
Ah, neighbours. Aren't they great? Mine are away at the mo, so LOTS of grinding and wire brushing going on...
Posted: Fri Jul 14, 2006 7:30 pm
by RogerRust
Easy I've just checked. Undo the three little screws that hold the shroud on wiggle it round a bit and undo the big screws Job done!
Want to know the secret????
.
.
.
.
.
.
.
.
.
Undo the pinch bolt at the bottom of the steering column and move the whole steering wheel up a bit first.
I had to do it that way because I didn't have a big socket!!
Posted: Sun Jul 16, 2006 10:03 pm
by Kevin
Well thats another trick leant.
Posted: Sun Jul 16, 2006 10:24 pm
by Welung666
RogerRust wrote:I had to do it that way because I didn't have a big socket!!
Do you have a centre punch? I don't have a large enough socket either thats why Phoebe has a centre punch mark on her steering wheel nut
Posted: Sun Jul 16, 2006 11:47 pm
by Kevin
Do you have a centre punch?
I have seen the damage that has been caused by a centre punch when used by the untrained and even worse chisel damage
