RE: dampers
Posted: Wed Jul 06, 2005 10:22 pm
Simply added mounting plates (think I used another set of bottom plates ex scrappy) below the springs - using the shackle bolts which are plenty long enough - and I used Mini front damper mounting brackets with large spreader plates bolted through the rear floor. The dampers were angled forwards slightly as I remember to put the plates in a 'strong' section of the floor - and it was a saloon, not a Traveller - which sadly has no 'strong section' at the rear !! The lever dampers were also filled with EP 90 - and the bump stops were cut down slightly.