Page 2 of 2
Re: Cylinder head decode
Posted: Fri Mar 18, 2016 10:54 pm
by philthehill
Having looked at the photos I would suggest that the head is a 850/998cc Mini/Metro.
The rockers are standard pressed steel ones used on all engine post forged rockers and pre sintered rockers.
Phil
Re: Cylinder head decode
Posted: Sat Mar 19, 2016 9:46 am
by bmcecosse
It's much earlier than that - no thermometer opening - which Mini/Metro heads have. 803 or 948 Minor head.
Re: Cylinder head decode
Posted: Sat Mar 19, 2016 10:22 am
by philthehill
The casting numbers 2A628, 12A1458, 2A269 which should appear on the head of a 803cc, 850cc, 948cc do not appear to be there though there is a 2A ***** cast into the block.
Here is a link to an early head on 'e' bay which has the correct numbers.
http://www.ebay.co.uk/itm/Early-Morris- ... SwWTRWyHf8
Note the forged rockers - lovely jubly.
Re: Cylinder head decode
Posted: Sat Mar 19, 2016 4:33 pm
by Pastypearce
Thanks all, I'll put it up for sale here as its no use to me.
Re: Cylinder head decode
Posted: Sat Mar 19, 2016 7:18 pm
by bmcecosse
The new valves and springs will transfer over to your own 202 head.