Page 2 of 2

Re: lowering front.

Posted: Tue Jul 07, 2015 6:25 pm
by rhysevans
I've measured the height on level(ish) ground for a rough idea and it's around 600mm from ground to the wheel arch. This seems quite low or is this about right?? Cheers rhys

Re: lowering front.

Posted: Tue Jul 07, 2015 7:34 pm
by philthehill
All measurements should be taken from the designated points as per the attached diagram.
All other measurements will give only a rough indication of the cars ride height.[frame]Image[/frame]