Page 2 of 2
Re: More 49 questions
Posted: Fri Dec 05, 2014 6:40 pm
by Redmoggy
Thanks Bryan. I had planned to get some paint matched to the still good original grey around the inside of the screen. However the better half has proclaimed that the car needs to be black.
Rod
Re: More 49 questions
Posted: Fri Jan 02, 2015 11:35 pm
by mike.perry
On CKD cars the inst. panel and glove box were generally not painted gold
Re: More 49 questions
Posted: Sat Jan 03, 2015 12:53 am
by POMMReg
mike.perry wrote:On CKD cars the inst. panel and glove box were generally not painted gold
When did full scale production start for NZ CKD Minor's, thought the pre-allocated
block CKDs were complete kits, wasn't until later locally sourced trim/glass etc was
used?
Am I talking rubbish?
Re: More 49 questions
Posted: Sun Jan 04, 2015 12:36 am
by Scott
mike.perry wrote:On CKD cars the inst. panel and glove box were generally not painted gold
From what I've seen, Australian CKD lowlights were the same as the UK cars, except for the steering wheel & column which were finished in the same gold as the dash. IIRC, the switch panel was also gold.
Re: More 49 questions
Posted: Fri Apr 08, 2016 10:21 pm
by Redmoggy
Had a very nice 49-50 in the workshop the other day and was just randomly comparing stuff. This car did not have the one piece floor. One strange thing I did notice was the join at the front scuttle. On my car this Seam is continually welded and has been done by hand with gas. On the this slightly later car it was spot welded with a machine. Perhaps I need to get a life!
Rod