Page 2 of 2
Posted: Thu Oct 21, 2004 11:22 am
by northerntony
Thats right guv! See cam you just need to think outside the box son. Ill show you how its done on your car if you like cam
Posted: Thu Oct 21, 2004 11:22 am
by Cam
Well, it doesn't though does it?? If it has to fit an A-series engine then it's more complex as the Ford flywheels don't fit
I'd hardly call this:
a simple slot-in job!!
He's removed most of the bulkhead to get the large Ford components to fit!!!
Posted: Thu Oct 21, 2004 11:37 am
by Multiphonikks
Cam wrote:Well, it doesn't though does it?? If it has to fit an A-series engine then it's more complex as the Ford flywheels don't fit
I'd hardly call this:
a simple slot-in job!!
He's removed most of the bulkhead to get the large Ford components to fit!!!
...and one which it seems, requires chassis strengthening (is it just me or does that cross-member look like it's slightly bent???)
Posted: Thu Oct 21, 2004 12:03 pm
by turbominor
that was the most horrifing conversion i have seen , like a complete custom chassis to .. any why oh why use a nasty old ford td... Why not a nice corsa 1.5td or even a diahatsu 3cyl tdi...
have had a tape measure on both last time i thought diesel..
no way you could fit a type 9 or mt75 box and bell housing to a minor without major mods.
sure he had to move the steering rack back....
Posted: Thu Oct 21, 2004 12:09 pm
by Cam
northerntony wrote:Thats right guv! See cam you just need to think outside the box son. Ill show you how its done on your car if you like cam
So you see, it's not as simple as you think. Maybe you need to think INSIDE the box at the workings a little more!!
And I don't need and conversions on my car thanks. I have done enough!!
Posted: Thu Oct 21, 2004 12:56 pm
by Kevin
See cam you just need to think outside the box son
Nah thats just for trying to alter theories, processes and working practices mainly in office environments, engineering is a far more structured science.
I have gone through them all at work, its a new ballgame (what ballgame) think outside the box (what box is that then) holistic solutions are now required (alternatives to something that works) and many others over the years, when in reality many things that work fine get upper management worried as they are so used to making things go wrong by change for changes sake, so much so that certain things go full circle and end up back where they started.
So I with Cam and forget the Box and stick with the Wheel.
Posted: Thu Oct 21, 2004 1:24 pm
by Welung666
Don't start with all that "thinking outside the box" and "ballgame" rubbish, I've heard all that drivvle off my lord and master, Justin King, all week! I work for Sainsbury's and he's doing the same to us as he did @ M&S! I'll give him "BALLGAME"
Sorry, just having a rant
Posted: Thu Oct 21, 2004 1:28 pm
by doobry
that was the most horrifing conversion i have seen
Think yourself lucky!
I've seen far worse than that
There was a website with project-gone-wrong-disater-cars dedicated to those ppl who had more enthusiasm than foresight or ability. I think it was called 'numpty cars' and showed the e-bay adverts of these scary project cars when the owner had given up and tried to offload.
Posted: Thu Oct 21, 2004 4:16 pm
by d_harris
I think I've seen that.............
Posted: Thu Oct 21, 2004 5:19 pm
by Welung666
I believe this is the site to which you refer
http://www.than.org/scrapped.shtml
very amusing
Posted: Thu Oct 21, 2004 6:28 pm
by Chris Morley
Yes, but at least those numptymobiles actually exist (although you do wonder why they bothered
). I think we'll have a long wait before Swiss Tony's efforts appear in the metal!
Posted: Thu Oct 21, 2004 6:32 pm
by Welung666
Chris Morley wrote:I think we'll have a long wait before Swiss Tony's efforts appear in the metal!
Metal?? It'll be a while before they fight their way out of the cobwebs and sawdust yet
Posted: Thu Oct 21, 2004 7:48 pm
by turbominor
Swiss Tony's
theres a line about sierra box's are like making love to a ..... somewhere in there
Posted: Thu Oct 21, 2004 8:02 pm
by Welung666
Something like "Cutting the bell housing is like making love to a beautiful woman"
What a strange love life
Posted: Thu Oct 21, 2004 8:37 pm
by turbominor
nice one lee!!
Posted: Thu Nov 04, 2004 9:52 am
by SwindonMoggy
I think a certain person has been watching to many Honda adverts (arnt they cool lol) & got carried away in his own imagination. However speaking of honda & the argument on change. I guess Honda has shown that sometimes its not good to stick with tradition & you should throw away the rule book.
The biggest problems with companys is that when they are suffering problems rather than address the issue direct they try & find a way around the situation. Take the post office! They were having problems. Rather than address them. They just changed the name. Wow that certainly solved all there problems. lol