Page 2 of 2

Re: hif38 carb questions

Posted: Thu Sep 30, 2010 5:37 pm
by mmjosh
i have tried adjusting them and tried starting it it fires up with the choke and the cuts out even if i release the choke.

Re: hif38 carb questions

Posted: Thu Sep 30, 2010 8:14 pm
by hotrodder13
did you let it warm up before turning the choke off :wink:

Re: hif38 carb questions

Posted: Thu Sep 30, 2010 8:20 pm
by mmjosh
i cant even do that

Re: hif38 carb questions

Posted: Thu Sep 30, 2010 8:25 pm
by bmcecosse
I don't get this - just lift the revs with the throttle screw and the mixture screw and get it running!

Re: hif38 carb questions

Posted: Thu Sep 30, 2010 8:41 pm
by mmjosh
i have tried everything and it wont go

Re: hif38 carb questions

Posted: Fri Oct 01, 2010 11:32 am
by bmcecosse
Does the piston rise and fall ? Pour some petrol down the carb throat - and crank it - does it run ?

Re: hif38 carb questions

Posted: Fri Oct 01, 2010 12:10 pm
by mmjosh
yes the piston rises and every thing and i have done that and it just wont go

Re: hif38 carb questions

Posted: Fri Oct 01, 2010 5:47 pm
by bmcecosse
Well - if it 'won't go' with petrol down the carb - the problem is electrical. OR - you have completely flooded it - remove plugs - spin the engine over for 10 seconds - fit a different set of plugs.

Re: hif38 carb questions

Posted: Fri Oct 01, 2010 5:50 pm
by mmjosh
ill try that but its not electrical problem