Posted: Wed Feb 11, 2004 3:25 pm
Yes doesnt look like you have the advantage of my sloping driveway either 
Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Looks wonky!
Page 2 of 2
Posted: Wed Feb 11, 2004 3:31 pm
in all fairness i have only had 2 weeks over xmas off so far..... i was working full time till about a week before this year started
Posted: Wed Feb 11, 2004 3:50 pm
Come on Matt dont defend yourself just take the light hearted banter in the manner it was intended 
, you dish enough out yourself, so dont become all defensive 
, you dish enough out yourself, so dont become all defensive Posted: Wed Feb 11, 2004 3:54 pm
If i didn't take it as light hearted, why would i have just shown a mate you taking the rip? yeah i take the p*ss a lot but i also get it back quite a lot!!!
Posted: Sun Feb 15, 2004 10:12 pm
lol! never realised that morris minor owners could be so bitchy, maybe i'll cut my losses and get out of the whole thing!
Posted: Mon Feb 16, 2004 9:28 am
Can I have your Mog if you do?
Posted: Mon Feb 16, 2004 2:32 pm
We are not at all, we just like to give each other a nudgelol! never realised that morris minor owners could be so bitchy,
every now and then.That was a good response Rob
Posted: Mon Feb 16, 2004 2:45 pm
Miaow..... 
Posted: Mon Feb 16, 2004 2:54 pm
Hehe, gotta get in there quick if there's a chance! Yeah, like Kevin said, we just keep each other on the ball. Helps to keep the blood flowing.
Posted: Mon Feb 16, 2004 10:28 pm
Nothing like a bit of banter now and then. One welded quarter panel, 3 more to go! Never knew just how much could be found with a single jab of the screw driver, my poor car.
Posted: Tue Feb 17, 2004 10:19 am
Dangerous things those screw drivers... especially when wielded by the MOT man....
Posted: Tue Feb 17, 2004 12:01 pm
Blimey how hard is your single jab, if it showed up 4 quarter panels.One welded quarter panel, 3 more to go! Never knew just how much could be found with a single jab of the screw driver
Posted: Tue Feb 17, 2004 12:17 pm
It was a very big screwdriver.
Posted: Thu Feb 19, 2004 8:24 am
I didn't need a screwdriver, my finger did the job (only the 1/4 plates were bad though ).
Back to the original topic I just wanted to say thanks for the help, a long afternoons work and Minerva is no longer wonky
Philip
).Back to the original topic I just wanted to say thanks for the help, a long afternoons work and Minerva is no longer wonky
Philip