Morris Minor Owners Club

My marina engined car (marina manifold) with the marina elbow on a hif 44 used the marina elbow and the minor airbox, but I have now gone for a mini elbow and airbox because I was mucking around with carbs...

Cheers all

If anyone has images they can post or e-mail to me at

Russ@MinorLCvreg.co.uk

No images im afraid... that setup has gone now

Following up my previous post I just remembered that the main reason why I struggled with the carb and intake set up was that the engine has a particularly long and unusually upward sloping alloy inlet manifold. If you have a Minispares/MG Metro or comparable unit you might get away with it.

Hi Russ either the mini or MG metro airbox will also fit the HIF 44 the better one would be from an MG metro as you can get a K & N filter to fit the airbox, but you may be able to get one to fit the mini airbox, if you look at the picture of the engine bay in Dave's car from over the pond you wil see the mini type fitted, I also think that the 1300 Maestro one also fits, and the chances of turning up a Princess one I would have thought would be difficult nowadays.
http://www.mmoc.org.uk/index.php?name=P ... ic&t=18304

They appear on ebay sometimes.

Hello again and a happy New Year to all.

See images below I have finally assembled the lot today and this is what I want to use but will the bonnet shut. I have no engine in the pick-up so kinda not easy to judge

Any info welcome

Russ

The air flow into the big carb will be badly strangled by the small diameter intake tube on that filter! You could cut more air holes around the sides of the casing - this is a common mod on Minis and seems to work for them.

Cheers bmcecosse

But will the bonnet shut using this set up!

There is only one way to find out.

Will the air cleaner not bolt direct onto the carb. My Princess one does.

Edit. Sorry didn't see the bit about no engine. Cant you try it on someone elses. Shouldn't be too big a job.

OK that's the intake trumpet I described earlier that casued contact with the bonnet. So my arrangement had a intake manifold that was longer and higher and a airbox that is a little smaller so it's going to be a close call.

Using the elbow and airbox from the MG Metro definitely allows the bonnet to shut. Airflow no problem up to 100bhp with a K&N filter element fitted. Removing the whole airbox on a rolling road session a few weeks ago gave 8 more bhp, 104 to 112, with no other changes other than a tweak to the mixture!

The only mod is to remove the gubbins at the front of the airbox and shorten it so that it will clear the radiator. Hacksaw and Araldite job!

Cheers Guys

I have a Metro air filter housing but guess I need the elbow.............anyone have a spare??

Ian: - still would like to see an image of the pricess air box

Thanks to all will keep you posted

Russ, Just been out and taken some photos.





Obviously this one from front. If you look closely you will see the 3/4" ally plate for LPG.





Taken from top showing closeness to wiper motor bracket.




Close up of ally plate. Obviously as you dont need LPG mixer platr you would have 3/4" more clearance.
Hope this helps. Also hope I have clicked on right code on Photobucket and pictures are not huge.

Cheers Ian

Looks good...........................and seeing it with teh engine in situ etc...........I guess my set up will be tight!!!

Thanks again..........................now any got a metro air filter elbow for the Hif 44

now any got a metro air filter elbow for the Hif 44

Here you go Russ how mant do you want
http://cgi.ebay.co.uk/austin-rover-metr ... dZViewItem

Cheers Kevin.......................

H

Thats almost the setup I had Russ, except mine had the stanard minor filter on the elbow and it cleared the bonnet

Sadly Matt the standard Minor elbow will not fit fit the HIF 44 carb it may well fit the HIF 38 though

I mean I was using the marina elbow on my HIF44, and the standard minor filter fitted on the elbow