Posted: Sun Jul 23, 2006 4:30 pm
do we know if the pressing was made with the hole, or was the hole put in afterwards
Over to Bill, maybe Morris Minor Owners Club
Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/
Interia light switch location on door post ?
Page 2 of 2
Posted: Sun Jul 23, 2006 4:33 pm
Hmm, good point Over to Bill, maybe
Over to Bill, maybe Posted: Sun Jul 23, 2006 4:41 pm
well we know that the lcv`s used the same b post as the four doors and the hinge holes were bunged up with wood, except that my van does not have the contour of the door at the bottom, it is flat and original, all saloons had the contour of the door at the bottom
also we know that they never did a special front valence for the lcv, the holes were put in afterwards for the bumpers
also we know that they never did a special front valence for the lcv, the holes were put in afterwards for the bumpers
Posted: Sun Jul 23, 2006 5:14 pm
I was delighted when you told us about the B posts, BTW. It means that I too have an original set, and they're in EXCELLENT condition, for once