Page 74 of 138
Posted: Tue May 20, 2008 8:47 pm
by Jay-Minor
the wife is working in marjorcia this week so i'm left on my own (at a lose end you might say) hope to get there thurs nite and see of colin and rob off.
i will be leaving (with the wife and little-un) on fri nite to catch up colin and rob in france
Posted: Tue May 20, 2008 9:23 pm
by paulk
See you all there
Posted: Tue May 20, 2008 9:26 pm
by Matt
where?
Posted: Tue May 20, 2008 9:40 pm
by paulk
Rob wrote
next week can I nominate the empress
How about here?
Posted: Wed May 21, 2008 7:27 am
by Peetee
See you all there
Likewise.
Posted: Wed May 21, 2008 10:06 pm
by Mike Shipman
Im afraid I cant make it again - my wife had made arrangements to see some of her friends...
So - have a great MoT Rob, Colin and Sue - take it steady and look after your back Colin and beware of the red vans.....(you know what I mean
)
Have agood evening, Mike.
Posted: Wed May 21, 2008 11:21 pm
by Matt
Look like I can't make it tomorrow, but the minor now has a new master cylinder (from a volvo 340 apparently)
East Kent Morris Minor club again in your neck of the woods!
Posted: Thu May 22, 2008 10:20 am
by chickenjohn
Hi SADMOGers,
the EKMM are heading your way again for a bank holiday weekend- and we would like to meet some local Minor enthusiasts while we are there. We are setting off in convoy from Kent tomorrow early morning, and expect to arrive at our hotel on Hayling island in the afternoon (travelling by A roads all the way).
Last year some of us met Carlo and saw his MM convertible and Jay joined us for the Beulieux motor museum visit. I'm not sure of the exact itinery yet, but we are going to drive around the Goodwood circuit, I think on the Friday and do lots of other things Sat and Sun. Anyone wishing to meet up with East Kent club or at least some of us and join us on events and runs, if possible, then PM me and we can exchange mobile numbers.
Posted: Thu May 22, 2008 6:18 pm
by d_harris
I'll be there tonight to tell stories of a good days work....
Posted: Thu May 22, 2008 6:47 pm
by Peetee
the EKMM are heading your way again for a bank holiday weekend
Sounds good to me! Amusingly enough, I'm heading over to Kent on Wednesday for a few days break!
Posted: Thu May 22, 2008 7:14 pm
by Matt
Im heading to sussex this weekend im afraid... so im a no show
Posted: Sun May 25, 2008 2:34 am
by callyspoy
hi folks, if i am aloud to still have my daddys carb(or if the dellorto miraculously starts working!) i would very much be interested in coming along on thursday...genuinely! i know i have been some what lax with my efforts, but please forgive me, you know my woes! let me know what the plans are! i may even try and bring along the old man(my 44 year old dad, don't let that offend anyone!!)
Posted: Sun May 25, 2008 10:06 am
by WPR678B
callyspoy wrote:i may even try and bring along the old man(my 44 year old dad, don't let that offend anyone!!)
Would be great to see you both
I have taken my "old man" along before, and he is 71 years young and enjoyed every moment!
Posted: Sun May 25, 2008 10:08 am
by Mike Shipman
i may even try and bring along the old man(my 44 year old dad, don't let that offend anyone!!)
the "old man" at 44
- he's a mere stripling... !!
I hope to be along this week.......and Im really old at 51...hope Colin comes along as he's even older
Posted: Sun May 25, 2008 4:22 pm
by Peetee
Don't want to put you off but I think there may be a few missing this week. I won't be there and I believe Colin, Rob and Jay will still be on the MOT.
Posted: Sun May 25, 2008 5:16 pm
by Matt
I intend to be present next week...
Callum what carb do you need if you can't get the dellorto sorted? I have a selection of HIF44s spare
I Have just won a "broken" welder on ebay... a Sealey SuperMig 170/1 for £16. Put a fuse in the plug (old one was missing) and it seems to work fine (although I havent actually tried welding with it as I dont have a spool of wire to go in it) just tested it with a bit of old wire stuck in the torch!
Heres its (newer model) little brother
http://www.sealey.co.uk/PLPageBuilder.a ... ctid=10127
good deal you think?
Posted: Sun May 25, 2008 6:35 pm
by Peetee
Well done!
Would you like to try it out on some bespoke seat bases?
Posted: Sun May 25, 2008 6:55 pm
by d_harris
I don't need bespoke seat bases, I got free ones.
Posted: Sun May 25, 2008 7:58 pm
by Matt
Why not get a cheap local engineer to knock some up Pete? ;)
Posted: Sun May 25, 2008 9:28 pm
by paulk
I'll see About this week, I have a 600 mile round trip on Friday so not sure If I'll be there thurs.
'Why not get a cheap local engineer to knock some up Pete? '
Whos that then ?
Also Just realised I've just hit 1000 posts