air filter base plate?

Post by **wibble_puppy** » Wed Sep 21, 2005 9:51 pm

how annoying - and to take so much time trying to find one too - bless you for trying packedup

and thanks very much for your offer 6thdude, over to you! Have PMd you

Post by **Packedup** » Wed Sep 21, 2005 10:16 pm

Very very annoying, I was sure there'd be a good one there somewhere!

I'll still keep an eye out for that metal conical bit though, while I do one last check tomorrow for a good plate. Although if I were you I wouldn't turn down the offer of a freebie one that's all nice and blasted clean!

Post by **wibble_puppy** » Wed Sep 21, 2005 10:57 pm

Packedup wrote: I'll still keep an eye out for that metal conical bit though, while I do one last check tomorrow for a good plate.

yer a star dude

juliet xxxxxxxxxxxxxx

Post by **Packedup** » Wed Sep 21, 2005 11:17 pm

I just want less clutter in the workshop!!!

Next trick is to try and find some mug who wants half a dozen totally knackered trunnions/ uprights ;)

Post by **Kevin** » Thu Sep 22, 2005 10:11 pm

I thought the plastic ccovers were fitted to the later vehicles, and when you get your replacement one Juliet make sure the pipe is secure, next time at a rally have a look at how many are missing them and some owners do not even realise it.

Post by **bigginger** » Thu Sep 22, 2005 10:36 pm

simmitc wrote:One purpose of that tube us as a silencer for the aie intake.

Apparently, the CKD export models didn't have the tube - I know not why not...

Post by **wibble_puppy** » Fri Sep 23, 2005 11:18 am

bigginger wrote:Apparently, the CKD export models didn't have the tube - I know not why not...

Easier to flat-pack

Post by **wibble_puppy** » Sat Sep 24, 2005 12:16 pm

latest installment: Steve at ESM very kindly gave me a knackered old metal conical section yesterday

Will need cleaning, reshaping and repainting, but 'tis still fab

Also got a lovely blasted base plate from a lovely person through the post this morning - only problem is I had clearly miscommunicated on which pipe was missing from mine, as the same pipe is missing from the one he sent me!!! lol

further updates as conditions warrant

and now - back to the studio

Post by **Packedup** » Sat Sep 24, 2005 1:10 pm

How much of a hurry are you in for the baseplate? I'm hoping my welder will eventually re-appear (lent it out last year...), and I can quickly repair where the pipe is splitting off one of the spares I found if/ when that happens. Still haven't had chance to look at the one on the 2 door (sorry), but will try and get to it Wednesday - It's tucked behind a pile of scrap panels and one of my cars, which makes it fun to get at!

You never know, the 2 door might also have a decent metal conical bit as well - The one I picked up the other day is probably in the same condition as your freebie one at best, and would've probably been worse by the time the post office had played sorting office rugby with it!

Post by **wibble_puppy** » Sat Sep 24, 2005 1:23 pm

Packedup wrote: How much of a hurry are you in for the baseplate?

None really!

Am hoping to fit one about November time.... but I can of course just re-install the one I have at the moment, no worries, till I get a funkier/smarter/goldplated/diamond-encrusted one.

Packedup wrote:I'm hoping my welder will eventually re-appear (lent it out last year...), and I can quickly repair where the pipe is splitting off one of the spares I found if/ when that happens.

Cool! Lucky you having a welder machine thingy

Packedup wrote:Still haven't had chance to look at the one on the 2 door (sorry), but will try and get to it Wednesday - It's tucked behind a pile of scrap panels and one of my cars, which makes it fun to get at!
You never know, the 2 door might also have a decent metal conical bit as well - The one I picked up the other day is probably in the same condition as your freebie one at best, and would've probably been worse by the time the post office had played sorting office rugby with it!

Ye'r a lovely man mate.... will wait to hear from you at your leisure

Have a great weekend

juliet xxxx

Post by **Cam** » Tue Sep 27, 2005 2:11 pm

Juliet,

Just in case, have a look at:
http://cgi.ebay.co.uk/MORRIS-MOGGY-MINO ... dZViewItem

Post by **Packedup** » Tue Sep 27, 2005 2:18 pm

Just get the seller to double check/ send photos of where the pipe meets the plate. I found quite a few that look fine till you peer closer and see the pipe is coming away, and that camera angle might be a bit flattering (although it could well be fine)

Post by **wibble_puppy** » Tue Sep 27, 2005 8:04 pm

cheers cam! you are the ebay wizard

have asked the seller about the pipe join, thanks for the tip packedup dude

I am so going to have to learn to weld.........

juliet xxxxxxxxxx