Inertia reel seatbelts for 4 door
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
Million&one
- Newbie
- Posts: 2
- Joined: Mon Nov 09, 2026 8:10 pm
- Location: Scottish Borders
- MMOC Member: No
Inertia reel seatbelts for 4 door
Hi all, just wondering if any members have inertia reel seat belts fitted to there 4 door moggy's? I've noticed that the original lower mounting point for the static belts is not directly below the pillar mounting - I thought the base of the "reel belts" had to be "level" to work correctly..?
Any info/photos would be gratefully received before I splash out on a set of inertia reel belts..
Any info/photos would be gratefully received before I splash out on a set of inertia reel belts..
Re: Inertia reel seatbelts for 4 door
Yes mount the inertia reel level if you can and have a slight angle on the belt?
Instructions for mounting the period static belts are in the manual.
Taupe
Instructions for mounting the period static belts are in the manual.
Taupe
-
ManyMinors
- Minor Legend
- Posts: 3134
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Inertia reel seatbelts for 4 door
I have fitted inertia reel belts into my late 1960s 4door using the standard mountings. As you say, the upper and lower mountings are not in line but they work fine. The only downside is that the reels are rather in the way if passengers enter through the rear doors.
-
tornullprojec
- Newbie
- Posts: 2
- Joined: Mon Nov 16, 2026 9:59 am
- Location: UK
- MMOC Member: Yes
Re: Inertia reel seatbelts for 4 door
I've been wondering about this too. It's reassuring to hear that the standard mounting points work, even with the reels and upper mounts not lining up perfectly. The issue with rear passengers getting in and out is something I hadn't considered though. Definitely worth checking the available space before buying a set.Million&one wrote: ↑Tue Nov 17, 2026 11:01 am Hi all, just wondering if any members have inertia reel seat belts fitted to there 4 door moggy's? I've noticed that the original lower mounting point for the static belts is not directly below the pillar mounting - I thought the base of the "reel belts" had to be "level" to work correctly..?
Any info/photos would be gratefully receivedSnow Rider before I splash out on a set of inertia reel belts..
Last edited by tornullprojec on Thu Nov 19, 2026 9:21 am, edited 1 time in total.
- svenedin
- Minor Legend
- Posts: 4974
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Inertia reel seatbelts for 4 door
The reels are also a bit of an obstruction for rear passengers on 2 doors but many owners don't carry rear passengers that often so it is a compromise.
Stephen
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
michael4
- Minor Fan
- Posts: 194
- Joined: Sun Oct 06, 2024 9:32 am
- Location: West Sussex
- MMOC Member: No
Re: Inertia reel seatbelts for 4 door
Which would explain why someone mounted the reels in my car jammed into the corner between the sill and cross member. Quite how they are fixed there will remain a mystery for now...
- svenedin
- Minor Legend
- Posts: 4974
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Inertia reel seatbelts for 4 door
This is the trouble with so many modifications. It seems a great idea but has downsides as well as advantages. The original belts in my car had to be adjusted every time they were used which became second nature eventually and they didn't create an obstruction on the floor but they didn't allow much comfort in use.
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
- Bill_qaz
- Minor Legend
- Posts: 2394
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Inertia reel seatbelts for 4 door
I have inertia belts on a four door, which I've replaced during ownership. The reel and belt end mount to the same bolt. The pillar fixing being further forward is no issue as it pivots, if spacer is correctly fitted. Yes it slightly in the way for rear passengers but still easier than two door. In picture the reel cover is not shown fitted. I found the upper mount too high and the belt was on mine and passengers neck rather than shoulder, so fitted proper seat belt lowering brackets.
Regards Bill
-
Million&one
- Newbie
- Posts: 2
- Joined: Mon Nov 09, 2026 8:10 pm
- Location: Scottish Borders
- MMOC Member: No
Re: Inertia reel seatbelts for 4 door
"THANK YOU" Bill....
Wonderful photos... just what I wanted to know/see.
I'm now thinking of moving the "mount" forward so it will sit in the centre of the pillar.... As the car is in a "million & one" bits at the moment it will be easier to do now than in the future, but I'm wondering if there is enough space between the seat and the pillar for the belt to fit...? Would anyone care to have a measure for me please...!
I'm now thinking of moving the "mount" forward so it will sit in the centre of the pillar.... As the car is in a "million & one" bits at the moment it will be easier to do now than in the future, but I'm wondering if there is enough space between the seat and the pillar for the belt to fit...? Would anyone care to have a measure for me please...!
- Bill_qaz
- Minor Legend
- Posts: 2394
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Inertia reel seatbelts for 4 door
I can't measure as car is in storage but I don’t think there's enough space. It also may stop seat from tilting if thats important to you.
Regards Bill