What unf bolts do I need to bolt the engine to engine stand

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
jmk2g40
Minor Friendly
Posts: 23
Joined: Wed Apr 13, 2011 12:25 am
MMOC Member: No

What unf bolts do I need to bolt the engine to engine stand

Post by jmk2g40 »

Hi there people, I recently bought an used a series engine to strip down and rebuild and learn along the way

I have bought an engine stand for it off eBay

Upon inspection it may be a 1098cc a series engines parts as it doesn’t have the 950stamped on the side of the block
The owner said he took it out of a 1968 Austin pickup which sadly was scrapped and they use the same engine it has the later heater thing on the back of the cylinder head not the brass tap like on my 948cc engine in my 1959 4 door.

I just need to buy 4 long bolts 70-80mm length to go through the bracket of the engine stand to the engine
But not sure on the thread which I want to bolt it where the gearbox would bolt to if that makes sense

Any ideas are welcome please
User avatar
Bill_qaz
Minor Legend
Posts: 2394
Joined: Fri Jan 14, 2022 7:31 pm
Location: Oxfordshire
MMOC Member: Yes

Re: What unf bolts do I need to bolt the engine to engine stand

Post by Bill_qaz »

Regards Bill
Peted7202
Minor Fan
Posts: 229
Joined: Tue May 31, 2022 2:44 pm
MMOC Member: Yes

Re: What unf bolts do I need to bolt the engine to engine stand

Post by Peted7202 »

Here's mine
Attachments
Engine Mount Frame 1 - Copy.jpg
Engine Mount Frame 1 - Copy.jpg (593.75 KiB) Viewed 2343 times
philthehill
Minor Maniac
Posts: 12019
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: What unf bolts do I need to bolt the engine to engine stand

Post by philthehill »

As regards the above photo spread the load and use the lower bolt holes as well - not just the top and centre bolt holes and support the front of the engine under the sump when stored.

Post Reply