Traveller rear axle

[Grobin]

Any kind person out tnere have a Traveller mk2 type rear axle for sale.
I currently have my Morris sulking in a local garage since discovering rotten
brackets . I've looked all over the internet but not found one - sadly a few offers which are clearly not morris. I would be very grateful - in Sheffield but happy to travel or pay delivery.
Thank you.

[svenedin]

So are you looking for a Series II split-case rear axle?

It is common for the axle brackets to rust and for the axle tube to develop pin holes and leak oil. This is because dirt and moisture collects there. It is possible (although it is skilled job) to repair the axle tube and weld on new brackets. So I was told on my most recent visit to Morris Minor Workshop in East Sussex.

Stephen

[philthehill]

If you are looking for a split axle casing/assy and have no success you can replace the axle with a later complete assy. You may have to fiddle around with the prop-shaft but all doable.
Good luck.

[MM1949]

What year is your Traveller?, it would help so it is known which axle you need.

[Grobin]

It's a 1969 model if that helps. Thanks.

[svenedin]

That's the commonest type of axle available. Solid case or "Banjo" type axle. It's the same axle for all the models of that era. It makes no difference that it's a Traveller. Usually, it only the empty axle that is sold. The user has to transfer over the differential. half-shafts and hubs.

Is your garage a specialist for classic cars?

Stephen

[Grobin]

The garage is first rate as far as I'm concerned. The problem in finding an axle housing is that the main dealers in the UK all say NCA for this part. No one seems to have one (though I have had a few breakers offering a traveller axle that actually came off a Triumph or similar vehicles )
The reason seems to be that the post covid interest in the moggy has led to such parts being sought by a greater number of owners than previously.
Not an easy part to manufacture in your shed and the odd available one is probably no better than the one I have.
A proficient welder could probably make a good job of welding new brackets on but I belive its cast iron and may not stand up to severe heat in the state its in.

The lady of the house suggests selling my little workhorse Traveller as its clear they 'can't be repaired'. That may be the answe

Thanks all for your interest

[les]

Can’t be repaired, if that was the case there’d be no Minors left on the road !
However you can advertise on here if you do sell.

[philthehill]

I recently was given a rear axle and it leaked like a sieve. I had cleaned up the casing and used FERTAN to convert the rust and the FERTAN found every pin prick in the casing. The casing was so bad I took it to the tip.
There is a rear axle for sale on 'e' bay but a long way from Sheffield. https://www.ebay.co.uk/itm/267550663947 ... R4qSqr37Zw
It looks a little rough but it may look worse than it is.
Now - I have a 1098cc Minor axle casing in excellent condition with good mounts going spare but I am in Hampshire 15 miles north of Southampton.
The price is £100 which is what it cost me. I have not fitted it or used it in my Minor.
Please note:- I am not prepared to pack it up or arrange a courier. You can collect if necessary.
If interested you can PM me.

Phil

[Grobin]

Hi Phil thanks for the reply, definitely interested if I can arrange transport.
I' ll see what I can work out and get back to you asap.

Thanks
Rob

[Grobin]

Hi, found a courier but they need your full name and address and an estimate of the weight to give a quote. A convenient day /time for collection would be helpful too.
Would you be good enough to send me a picture so they understand what the item is.
I'll get back to you regarding payment.

Thanks Rob

[philthehill]

I cannot attach a photo to a PM.
I will PM you my address.
You can copy the photos so that your courier can see what he is dealing with.
The weight of the bare casing is 8.6Kg.
Here are three pictures of the axle casing.
I have included the spring seats so that you can see their condition which is excellent.
The axle casing is generally oil free. The inside of the casing will need a good clean out to get rid of the spiders etc.
The axle has been dry stored with oiled socks placed over the bearing/seal seats. The hub nuts are included in the sale.

axle333.jpeg (159.31 KiB) Viewed 677 times

axel 23.jpeg (79.87 KiB) Viewed 677 times

axel24.jpeg (67.31 KiB) Viewed 677 times

[Grobin]

Looks good to me, big sigh of relief.
How would you like payment ?

Regards Rob