If rear still need bleeding then jack rear axle up as high as you can, this gets it higher than master cylinder.
Sounds like you're making progress
Thanks!simmitc wrote: ↑Thu Jun 04, 2026 9:43 am Excellent news, and thanks for the update; it's always good to hear the final solution.
To avoid cylinders seizing in future, the best solution is regular use. If you do need to park up for an extended period, then leave the handbrake OFF and secure the car by leaving in gear, chocking wheels etc. For really extended periods, raise the whole car on stands so that the tyres are off the ground.
I haven't checked the front brakes yet. The rear shoes are very worn, i couldn't get them to lock on the adjusters so i have ordered new shoes all round. Whe i fit them next week i will check the front cylindersManyMinors wrote: ↑Thu Jun 04, 2026 10:28 am Although you've only had the car garaged for a year, who knows what condition the brakes were in prior to that. It hasn't been MOT'd for nearly 9 years, so quite likely has not been regularly maintained for some time? You've made a good start at the rear but have you checked all the front cylinders to make sure that all the pistons are freely moving? That would be my next move. Minor brakes get a poor reputation but poor braking is generally just a lack of servicing. I wouldn't even consider driving a recently acquired old car without an MOT until I'd given the brakes a thorough check through. As others have already said, brakes (and old cars in general) need regular use![]()