It seems to come down from the top right corner of the screen.
- 20260328_123819.jpg (1.51 MiB) Viewed 908 times
Steel wire - any ideas?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Steel wire - any ideas?
Just found this steel wire in the right hand glove box. What is it please?
It seems to come down from the top right corner of the screen.
It seems to come down from the top right corner of the screen.
1967 1098 saloon (known by previous owner as 'Fitzroy')
-
geoberni
- Minor Maniac
- Posts: 5241
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Steel wire - any ideas?
Headlining wire. From the looks of that loop, the screw has come out.
I'd guess the headlining is a bit 'loose' on that side if you press it gently.
I'd guess the headlining is a bit 'loose' on that side if you press it gently.
Basil the 1955 series II
Re: Steel wire - any ideas?
Bang on! Thank you.
Yes, the headlining is a bit loose on that side (I hadn't noticed) and if I pull that wire, it tightens! So I guess I should fix it to a screw.
Yes, the headlining is a bit loose on that side (I hadn't noticed) and if I pull that wire, it tightens! So I guess I should fix it to a screw.
1967 1098 saloon (known by previous owner as 'Fitzroy')
-
geoberni
- Minor Maniac
- Posts: 5241
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Steel wire - any ideas?
I suspect the screw might have completely fallen out, since that loop is quite neat.
You might have to look for the (hopefully still there) one on the other side, to get an idea where it goes.
The ones on my SII are quite high up in the corner, but that doesn't mean they are in the factory correct place.
Basil the 1955 series II