Hello,
From others experience is it worth buying Polyurethane spring pads instead of the standard rubber type ?
Kind regards.
Polyurethane spring pads ?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
alfie austin
- Minor Friendly
- Posts: 64
- Joined: Sat Jul 12, 2014 10:46 pm
- Location: East Manchester
- MMOC Member: Yes
-
svenedin
- Minor Legend
- Posts: 4644
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Polyurethane spring pads ?
I fitted polyurethane spring pads and I have no complaints about them. I fitted them because I do not have much confidence in new rubber parts which seem to fail too quickly.
Stephen
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
philthehill
- Minor Maniac
- Posts: 12069
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Polyurethane spring pads ?
The poly spring seats are much better than the original rubber versions.
You can go one step better and fit the alloy spring seat plates from Peter May Engineering.
Or even two steps better fit the plates from the Minor commercial series which does away with the rubber spring seat altogether. Unfortunately they are no longer available but they can be made.
You can go one step better and fit the alloy spring seat plates from Peter May Engineering.
Or even two steps better fit the plates from the Minor commercial series which does away with the rubber spring seat altogether. Unfortunately they are no longer available but they can be made.
- Spring plates 2.JPG (1.06 MiB) Viewed 31317 times