Seatbelt fixings
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Seatbelt fixings
Hi, does anyone know where to get long seatbelt bolts and spacers for the upper fixing point on the 'B' post on a Traveller.
Trouble removing worn convertible hood locating pins.Screw heads rounded off. Thinking whether to try cutting bracket carefully with my cut off tool.
-
ManyMinors
- Minor Legend
- Posts: 3112
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Seatbelt fixings
A Morris Minor specialist?
A seatbelt business?
When I last purchased a set of new seatbelts, they came with a large selection of different length bolts included.
I'd be surprised if they were very difficult to obtain with a bit of ringing around
A seatbelt business?
When I last purchased a set of new seatbelts, they came with a large selection of different length bolts included.
I'd be surprised if they were very difficult to obtain with a bit of ringing around
-
Bill_qaz
- Minor Legend
- Posts: 2239
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Seatbelt fixings
7/16 seatbelt bolt search on fleabay brings up dozens of options,
have you bothered to do any searches?
Regards Bill
-
philthehill
- Minor Maniac
- Posts: 12096
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Seatbelt fixings
I have two of the special 7/16" UNF spacer bolts/tubes as used for installing the seat belt upper anchorages to the 'B' post of a Morris traveller.
They are used to go through the wood capping attached to the 'B' post.
Below is a photo of the spacer bolts.
The general dimensions are:-
Length under tube head......2.875".
Outside dia of tube.....9/16".
Thread in tube......7/16" UNF.
Dia of tube head ......3/4". There are two flats on the tube head to attach a spanner.
See BMC Minor wksp manual Section R 38, fig 56 for details.
Qty 4 spacer bolts/tubes are required when fitting the seat belt as shown in the wksp manual.
They are used to go through the wood capping attached to the 'B' post.
Below is a photo of the spacer bolts.
The general dimensions are:-
Length under tube head......2.875".
Outside dia of tube.....9/16".
Thread in tube......7/16" UNF.
Dia of tube head ......3/4". There are two flats on the tube head to attach a spanner.
See BMC Minor wksp manual Section R 38, fig 56 for details.
Qty 4 spacer bolts/tubes are required when fitting the seat belt as shown in the wksp manual.
- Seat belt tubes.JPG (100.99 KiB) Viewed 46766 times