Identify Paint Finish
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Identify Paint Finish
I have a 1958 Morris Minor and I have completely stripped and repaired the floors/frame. The bodywork paint (Maroon) has scuffs and a few scratches that are through the paint. I'm undecided whether to repair those areas or to do a full respray. My problem is that I do not know what the paint finish is. I know they were originally painted in cellulose. I pretty sure it's been repainted sometime since then. How do I identify what the paint finish is?
- svenedin
- Minor Legend
- Posts: 4789
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Identify Paint Finish
I believe you can scuff an area of paint with 400 grit paper and then test with a rag soaked in cellulose thinners. If the paint dissolves or softens it is cellulose paint.
Stephen
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
firedrake1942
- Minor Legend
- Posts: 3143
- Joined: Tue Aug 25, 2015 6:07 pm
- MMOC Member: No
Re: Identify Paint Finish
If 1958 is the correct date and it is a UK produced vehicle, it is unlikely that it would originally have been Maroon (A or B). Maroon as not used on the Minor until October 1967.
- Attachments
-
- Screenshot 2025-08-19 at 19.41.02.png (152.2 KiB) Viewed 5467 times
Re: Identify Paint Finish
Thanks
-
philipkearney
- Minor Fan
- Posts: 466
- Joined: Wed Jun 27, 2018 1:30 pm
- Location: Scottish Borders
- MMOC Member: Yes
Re: Identify Paint Finish
If in any doubt as to what paint you have, you would be better to spray the panel first with a barcoat or other isolator. This seals the old paint and you can then overcoat with primer, topcoat etc with no risk of reactions from the old paint.
https://u-pol.com/product/coatings/spec ... -isolator/
https://u-pol.com/product/coatings/spec ... -isolator/