Identify Paint Finish

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Peted7202
Minor Fan
Posts: 234
Joined: Tue May 31, 2022 2:44 pm
MMOC Member: Yes

Identify Paint Finish

Post by Peted7202 »

I have a 1958 Morris Minor and I have completely stripped and repaired the floors/frame. The bodywork paint (Maroon) has scuffs and a few scratches that are through the paint. I'm undecided whether to repair those areas or to do a full respray. My problem is that I do not know what the paint finish is. I know they were originally painted in cellulose. I pretty sure it's been repainted sometime since then. How do I identify what the paint finish is?
User avatar
svenedin
Minor Legend
Posts: 4789
Joined: Fri Aug 29, 2014 9:27 am
Location: Surrey
MMOC Member: Yes

Re: Identify Paint Finish

Post by svenedin »

I believe you can scuff an area of paint with 400 grit paper and then test with a rag soaked in cellulose thinners. If the paint dissolves or softens it is cellulose paint.

Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.

Stephen
firedrake1942
Minor Legend
Posts: 3143
Joined: Tue Aug 25, 2015 6:07 pm
MMOC Member: No

Re: Identify Paint Finish

Post by firedrake1942 »

If 1958 is the correct date and it is a UK produced vehicle, it is unlikely that it would originally have been Maroon (A or B). Maroon as not used on the Minor until October 1967.
Attachments
Screenshot 2025-08-19 at 19.41.02.png
Screenshot 2025-08-19 at 19.41.02.png (152.2 KiB) Viewed 5476 times
Peted7202
Minor Fan
Posts: 234
Joined: Tue May 31, 2022 2:44 pm
MMOC Member: Yes

Re: Identify Paint Finish

Post by Peted7202 »

Thanks
philipkearney
Minor Fan
Posts: 466
Joined: Wed Jun 27, 2018 1:30 pm
Location: Scottish Borders
MMOC Member: Yes

Re: Identify Paint Finish

Post by philipkearney »

If in any doubt as to what paint you have, you would be better to spray the panel first with a barcoat or other isolator. This seals the old paint and you can then overcoat with primer, topcoat etc with no risk of reactions from the old paint.

https://u-pol.com/product/coatings/spec ... -isolator/
Post Reply