Temperature sensor threads.

[Jonessa]

Hi, does anyone know what the threads are for the temperature sender in the block of a 1098 engine, mine has a smallish electronic sender fitted into a larger brass plug just below the thermostat housing, the car is still positive earth and the current gauge doesn't work, I have tried 2 senders although the gauge is a cheap one. I have been offered a used but second hand good quality gauge with capillary tube directly to block, I believe it was fitted to a classic seventies Japanese car, I have not seen it yet but assume it's metric so I will need to get an adapter but don't know the block threads on the engine, any help thanks, Steve

[Bill_qaz]

20240323_125911.jpg (1.57 MiB) Viewed 4358 times

It's 5/8" UNF.

[svenedin]

5/8" x 18 tpi UNF


Stephen

[Jonessa]

Thank you that gives me something to go on now for getting an adapter, I really don't like not having a temperature gauge fitted especially on a car I don't know.

[Bill_qaz]

Thank you that gives me something to go on now for getting an adapter, I really don't like not having a temperature gauge fitted especially on a car I don't know.

The capillary in my picture is a cheap smiths replica off fleabay and screws directly in with no adaptor.

20220310_131723.jpg (1.63 MiB) Viewed 4222 times