Distributor question.

[elscint]

Hello all, I have just installed an Accuspark distributor in my 64 Minor 1098. Only problem now is I had to remove the oil pressure gauge connector as it was hitting the distributor vacuum feed when I was setting the timing. I had to reinstall the oil pressure sensor but without the adapter for the pressure gauge. My question is can I rotate the distributor, say 90 Deg clockwise and then move the spark plug leads all clockwise 90 degrees, would this work?
John .

[mobylette]

Yes.

[svenedin]

Absolutely you can. The leads are not all the same length so check which ones will fit best where. Firing order 1,3,4,2 anticlockwise.

Stephen

[elscint]

Thanks gents for prompt positive reply.
John