Engine bay illumination

[Sleeper]

Dear All

Had half an hour spare today and pondered.... what if I break down at night.... well the solution is to carry a torch or

Before..

light4.jpg (394.74 KiB) Viewed 3128 times

After...

light2.jpg (1.04 MiB) Viewed 3128 times

and the LED strip....

light3.jpg (904.38 KiB) Viewed 3128 times

Spot the croc clips on the battery....

P.S. Admin The photos still aren't the right way up ?


John ;-)

[myoldjalopy]

Very ingenious! How long does the battery last with the light on?

[Sleeper]

I'd say a hell of a long time, but I'll go and measure the current ( milliamps ) and check the battery capacity...

P.S. They're not on all the time... ;-)

John

[Sleeper]

According to my Calculations 22,105.26 Hours ( 921 days approx)

1.9mA,42Ah battery

John ;-)

[myoldjalopy]

Very good. Let's hope your roadside repair doesn't take that long!

[geoberni]

P.S. Admin The photos still aren't the right way up ?
John ;-)

That's due to you posting from your phone, or images on your PC that originated on your Phone and you haven't corrected the data/settings the phone gave it...


I just saved your image to my PC, rotated it and then re-saved. Voila

Engine Bay.jpg (1.1 MiB) Viewed 3099 times

That's a very busy looking engine bay. Nice to see the Servo the right way around.

I've seen the occasional classic with a period bakelite bulb holder under the bonnet.

[Sleeper]

Well maybe, but i sent them from my phone to my laptop , where they appear the correct orientation, then posted here and they've flipped??
Being a total numpty ...what/where do I have to alter ?

John ;-)

[StillGotMy1stCar]

According to my Calculations 22,105.26 Hours ( 921 days approx)

1.9mA,42Ah battery

John ;-)

Are you sure it's 1.9mA, or could it be 19mA or 190mA. LED's must have improved somewhat, I'd expect a single white LED to draw 10mA, although I have noticed torches use high speed switching to reduce the current consumption.

Regards John

[geoberni]

Well maybe, but i sent them from my phone to my laptop , where they appear the correct orientation, then posted here and they've flipped??
Being a total numpty ...what/where do I have to alter ?

John ;-)

I've had that. The PC can 'compensate' somehow, I guess there must be some small byte of info that can let the PC interpret the phone angle.
What I do on the PC, assuming it 'looks OK' on the PC already, is upload it and then check the Post Preview.
If it's wrong there I delete the uploaded and open the original in a photo viewer that allows editing, even if it's just rotating.
Even if it looks 'the right way' in the viewer I rotate it and re-save it. That invariably sorts it out.

[Sleeper]

Thank you..
Will give it a go...

John ;-)

[Sleeper]

1.93mA

ma1.jpg (1.23 MiB) Viewed 3071 times

rotated 90 clockwise.....

ma2.jpg (1.21 MiB) Viewed 3071 times

I GIVE UP....


John ;-)

[StillGotMy1stCar]

False reading I think, on your meter for current under 200mA you need to connect the Red lead to the right input socket not the left 10A socket.

Regards John

[Sleeper]

John

Thank you, I stand corrected ( internal fuse gone on the mA input ) , 179ma , 234 Hours , approx 9,8 days..

John ;-)

[StillGotMy1stCar]

Thank you for the update, that’s more like it

Regards John

[myoldjalopy]

Still plenty of time to carry out a roadside repair!