Rust-Oleum Mathys Noxyde
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 74
- Joined: Thu Dec 07, 2023 9:24 am
- Location: North West UK
- MMOC Member: Yes
Rust-Oleum Mathys Noxyde
This stuff sounds like it's the biz...anybody used it? I'm quite near the sea (which is nice ) and things turn rusty quick, you can almost watch happening...
Rust-Oleum Mathys Noxyde is a single pack water-based elastomeric coating with unequalled corrosion protection. For easy spray application as well as to provide the same protection as a complicated and more expensive polyurethane systems.
Noxyde has had over 15 years in the highest corrosion class (C5-M), according to ISO 12944. Ultimate corrosion protection, even in the severest of conditions
Key Features
200% elastic coat which does not crack or peel.
It has excellent coverage of nuts, bolts and also welds.
Dry fall: saves preparation as well as clean up time.
Primer and topcoat in one.
UV and also impact-resistant
Apply with a sprayer.
10 Year Guarantee*
Rust-Oleum Mathys Noxyde is a single pack water-based elastomeric coating with unequalled corrosion protection. For easy spray application as well as to provide the same protection as a complicated and more expensive polyurethane systems.
Noxyde has had over 15 years in the highest corrosion class (C5-M), according to ISO 12944. Ultimate corrosion protection, even in the severest of conditions
Key Features
200% elastic coat which does not crack or peel.
It has excellent coverage of nuts, bolts and also welds.
Dry fall: saves preparation as well as clean up time.
Primer and topcoat in one.
UV and also impact-resistant
Apply with a sprayer.
10 Year Guarantee*
Re: Rust-Oleum Mathys Noxyde
I have not used it, nor heard anything about it. It sounds too good to be true - I'm intrigued to learn that it's 200% elastic!
-
- Minor Maniac
- Posts: 10935
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
-
- Minor Friendly
- Posts: 74
- Joined: Thu Dec 07, 2023 9:24 am
- Location: North West UK
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
Yes simmitc - too good to be true! Except it seems to be rated by industrial users (on steel cladding not cars though). Tempted to try a bit out, it's expensive (https://andrewscoatings.co.uk/shop/meta ... ys-noxyde/) but not as expensive as some of them I've come across. Might try it on the tin roof of my morris fettling shed which has lost most of it's zinc. I've tried using liquid zinc paint but was disappointed. I've since learnt that you have to apply it to fresh, bright steel because steel starts reacting with any moisture in the air immediately and any rust carries on developing under the paint. Usually only factory environments can do it properly.
-
- Minor Addict
- Posts: 701
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
I used a rust preventer with lanolin.Niw everything smells of sheep so this is handy maybe for next year.
-
- Minor Friendly
- Posts: 74
- Joined: Thu Dec 07, 2023 9:24 am
- Location: North West UK
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
And I'm going to use a lanolin based gloop to spray into box sections - I'm told it creeps and displaces moisture and perhaps use this tough stuff on exposed bits. Hopefully the sheep won't mob me when I drive through Llanberis on my way to weekend hill walksClassiccars wrote: ↑Thu Jan 11, 2024 6:31 pm I used a rust preventer with lanolin.Niw everything smells of sheep so this is handy maybe for next year.
-
- Minor Addict
- Posts: 701
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
The spray gun was useless so brushes on.Kerp an eye out for rams.
-
- Minor Addict
- Posts: 701
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
Found my spray useless on large areas so brushed on.Keep an eye out for rams.
-
- Minor Friendly
- Posts: 74
- Joined: Thu Dec 07, 2023 9:24 am
- Location: North West UK
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
Now that's good advice, I will keep an eye out for any rams.Classiccars wrote: ↑Thu Jan 11, 2024 9:00 pm The spray gun was useless so brushes on.Kerp an eye out for rams.
Re: Rust-Oleum Mathys Noxyde
I’ve used Waxoyl on two restorations with good results, I know it’s been around for a long time but that’s no bad thing. I suppose I’m saying if something works, you stick to it. All manufacturers claim to be the best !
-
- Minor Addict
- Posts: 701
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
Handy to know.
-
- Minor Addict
- Posts: 701
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
Handy to know.
-
- Minor Friendly
- Posts: 74
- Joined: Thu Dec 07, 2023 9:24 am
- Location: North West UK
- MMOC Member: Yes
Re: Rust-Oleum Mathys Noxyde
worried about welding...doing increasing amounts as the years go by and some people have apparently started fires. Lanoguard might be similar (my prefered option in box sections) but my experience is it's a bit thinner and doesn't build up as much. But on exposed sections I'm looking for some kind of tough paint. Noxyde looks like it might be it, but only a long trial will tell.