Hi
I’ve just converted my Smooth cased box to hydraulic clutch but stupidly used an old Mini clutch slave cylinder that now leaks. It worked OK but I’d rather use the proper MM/A35/Spridget part this time.
What is the part number I need to use when ordering?
Many thanks
Clutch slave cylinder
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
philthehill
- Minor Maniac
- Posts: 11574
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Clutch slave cylinder
https://www.moss-europe.co.uk/slave-cyl ... soc=140953
The Mini clutch slave cylinder is more than suitable for use with a Minor hydraulic clutch conversion and has the same Pt No: GSY110 as the MG/Sprite slave cylinder.
What I would recommend is that if you are not using the Minor cut down operating rod you make the slave cylinder operating rod adjustable.
Below is a photo of a classic Mini/Midget/Sprite clutch slave cylinder with adjustable operating rod as fitted to my Minor.
The Mini clutch slave cylinder is more than suitable for use with a Minor hydraulic clutch conversion and has the same Pt No: GSY110 as the MG/Sprite slave cylinder.
What I would recommend is that if you are not using the Minor cut down operating rod you make the slave cylinder operating rod adjustable.
Below is a photo of a classic Mini/Midget/Sprite clutch slave cylinder with adjustable operating rod as fitted to my Minor.
- Hydraulic clutch 6.JPG (855.79 KiB) Viewed 422 times
Re: Clutch slave cylinder
Thanks Phil. I’ve got an adjustable rod and a Minispares account, so it looks like I’m sorted 
