non starter

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
simonhbanks
Newbie
Posts: 3
Joined: Tue May 31, 2016 3:57 pm
MMOC Member: No

non starter

Post by simonhbanks »

I have a 1964 morris traveller which will not start.
The fuel is being pumped through,
There is a spark at the plug.

If I spray easy start into the carb the engine will fire up for a few times.

Any suggestions as to why the engine will not continue to run?
unclealec
Minor Fan
Posts: 192
Joined: Sat Jan 15, 2022 10:23 am
Location: Manchester
MMOC Member: Yes

Re: non starter

Post by unclealec »

Not been standing for a long time has it? Modern petrol dies quicker than good old, er, old petrol.
Alec Gatherer
Manchester-by-the-Ditch.
jagnut66
Minor Legend
Posts: 3703
Joined: Fri Apr 11, 2008 7:28 pm
Location: Mansfield, Nottinghamshire.
MMOC Member: Yes

Re: non starter

Post by jagnut66 »

Hi,
Have you owned the car long or is it a new purchase?
Have you had it running?
Was it 'lumpy'?
It might be your timing is out, it may be it needs a new head gasket....
More info please.
Then someone on here will have an answer for you.
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels, now being sprayed by me, slowly......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1952 Morris Minor MM highlight with sidevalve engine still fitted, wants work, so joins the queue for now......
simmitc
Moderator
Moderator
Posts: 4918
Joined: Thu Apr 15, 2004 9:43 am
Location: Essex
MMOC Member: Yes

Re: non starter

Post by simmitc »

Does the piston slide freely in the carb? Do you use the choke? As above, a bit more information please and we'll do our best to help. You could check the float chamber and make sure that the is no muck blocking the inlet to the jet. The fact that it sort of runs on easy start suggests that it might be fuel related.

Also check the compression on all four cylinders. Using a gauge is ideal, but fitting one plug at a time and using the starting handle will give a fair idea of what it's like. How experienced are you with messing around with engines?
Post Reply