Hi,
I have just bought a front headlining and wire for Elsie May, as at present she has red carpet stuck up to the cab roof (and you know I'm going to have fun removing that....... ).
The back still has it, so what happened up front I don't know......
While I wait for it to arrive I just wondered if there are any tips for the fitment of this, anything that makes life easier?
Many thanks,
Mike.
Fitting a Traveller front headlining
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 3658
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Fitting a Traveller front headlining
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
-
- Minor Addict
- Posts: 723
- Joined: Mon Dec 28, 2020 1:56 pm
- Location: Pontypridd
- MMOC Member: Yes
Re: Fitting a Traveller front headlining
I would say two pairs if hands including someone that has done the job before.Appears to be quite a job if your not sure.Get lots of advise and help before starting.Dont want to mess it up and waste money best wishes as I need all my headlining done.Wish there was a video.
Re: Fitting a Traveller front headlining
Have you got the hoops (List rods) and the ply with clips for the front fixing?
Taupe
Taupe
-
- Minor Legend
- Posts: 3658
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Fitting a Traveller front headlining
Ah, I think not, thanks for the prompt Taupe, I would doubtless have stripped it all out and then noticed I was missing something......Have you got the hoops (List rods) and the ply with clips for the front fixing?
The carpet appears to be glued directly to the cab roof.
So presumably the originals were discarded.....
Why someone would do this is beyond me.
I don't see the hoops listed with either ESM or Charles Ware, does this mean I will have quite a task finding some?
Or does someone know a source?
I see there was a post on here before about these
viewtopic.php?t=72398
Many thanks,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
-
- Minor Addict
- Posts: 956
- Joined: Fri Aug 26, 2011 12:42 pm
- Location: West Yorkshire
- MMOC Member: Yes
Re: Fitting a Traveller front headlining
Wheeler Dealers covered this rather better than their usual standard. Starts at 39:15.
https://www.dailymotion.com/video/x4zyfnj
I think you'll have trouble finding the front hoops, but I have seen replacement ply inserts and clips on sale somewhere. If you can't find the ply mine's still out so I could make a tracing if that would help.
Mark
Re: Fitting a Traveller front headlining
No fitting tips I'm afraid but it would be a good idea to stick a couple of sound deadening pads to the roof before you fit the lining. Every little bit helps to dampen noise and drumming.
I use these
https://www.ebay.co.uk/itm/282810412476
I use these
https://www.ebay.co.uk/itm/282810412476
-
- Minor Legend
- Posts: 2848
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Fitting a Traveller front headlining
There is only one metal hoop in the front headlining. I wouldn't expect it to be hard to obtain. Once you have all the parts, it isn't a particularly difficult job to do. My new headlining came with fitting instructions which were straightforward enough to follow. Just take your time and all should be fine . Remember to feed the wires up the front pillar for the interior light along with the headlining cable.
-
- Minor Legend
- Posts: 3658
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Fitting a Traveller front headlining
Funnily enough I have been toying with leaving the (what must be rubber backed) carpet in place, for this very reason....it would be a good idea to stick a couple of sound deadening pads to the roof before you fit the lining. Every little bit helps to dampen noise and drumming.
That and the fact that removing it and the glue holding it will probably leave me needing to respray the interior of the cab roof!
Thanks for the confirmation. Now I just need to find one.....There is only one metal hoop in the front headlining.
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
-
- Minor Legend
- Posts: 3658
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Fitting a Traveller front headlining
As an aside, I found these while looking for a metal rail for the front (links below), not what I am looking for, as the rear of Elsie May still has its headlining in place and I have or have found the wooden parts for the front but hopfully of use to someone....
Best wishes,
Mike.
https://www.googleadservices.com/pagead ... RBC&adurl=
https://www.google.com/aclk?sa=l&ai=DCh ... hd6BAgBEF0
https://www.ebay.co.uk/itm/184758915662 ... Sw0xJgc0ga
https://www.ebay.co.uk/itm/254840940558 ... SwOMdZUSk9
https://www.ebay.co.uk/itm/254193256644 ... Sw3YJZTQ~K
https://www.ebay.co.uk/itm/224366421020 ... SwdttgOQq1
https://www.ebay.co.uk/itm/254111032441 ... SwwvZZUSYJ
Best wishes,
Mike.
https://www.googleadservices.com/pagead ... RBC&adurl=
https://www.google.com/aclk?sa=l&ai=DCh ... hd6BAgBEF0
https://www.ebay.co.uk/itm/184758915662 ... Sw0xJgc0ga
https://www.ebay.co.uk/itm/254840940558 ... SwOMdZUSk9
https://www.ebay.co.uk/itm/254193256644 ... Sw3YJZTQ~K
https://www.ebay.co.uk/itm/224366421020 ... SwdttgOQq1
https://www.ebay.co.uk/itm/254111032441 ... SwwvZZUSYJ
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)