Propshaft Universal Joint......Sealed or Not ?

[pgp001]

Should I go for this one......
https://www.moss-europe.co.uk/universal ... soc=136346

Or this one......
https://www.moss-europe.co.uk/universal ... soc=136348

Any one got an opinion, or first hand experience please.

Phil P

[philthehill]

Out of the two I would go for the one with grease nipple.
You can never have too much grease in a U/J.

When greasing the U/J if you see grease expelling past the bearing seal(s) - stop or you can displace the seal which will let crud into the joint.

[pgp001]

Cheers Phil

I was not aware of the sealed type until I started looking today, I will stick with the grease nipple type.

Phil P

[geoberni]

You can never have too much grease in a U/J.

When greasing the U/J if you see grease expelling past the bearing seal(s) - stop or you can displace the seal which will let crud into the joint.

Ummm, sounds contradictory, but I know what you mean...