Oil filter

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
wurlitzer
Minor Friendly
Posts: 26
Joined: Wed Apr 20, 2011 6:20 pm
Location: UK
MMOC Member: Yes

Oil filter

Post by wurlitzer »

I’ve just changed the oil and got a washer left over buried in the sludge in the drip tray,I’ve got one on top of the spring,should there be another underneath the spring,
Thanks
wurlitzer
Minor Friendly
Posts: 26
Joined: Wed Apr 20, 2011 6:20 pm
Location: UK
MMOC Member: Yes

Re: Oil filter

Post by wurlitzer »

There’s a chance it could have lain in the drip tray for months or years and not be part of it atall
image.jpg
image.jpg (1.41 MiB) Viewed 887 times
les
Minor Maniac
Posts: 9175
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: Oil filter

Post by les »

There is a rubber washer that goes over the long bolt after the steel washer and under the dish. I've got a screw on filter but from memory I'm pretty sure that's where it goes.

myoldjalopy
Minor Legend
Posts: 3025
Joined: Tue Jan 29, 2013 10:32 pm
Location: Kernow
MMOC Member: Yes

Re: Oil filter

Post by myoldjalopy »

General sequence is:
bolt - steel washer - rubber washer (which Les refers to and is critical to stop oil leaks at the base of the filter canister) - filter canister - steel washer - spring - steel washer - felt washer - pressure plate - filter. Often, due to negligence by previous owners/cack-handed mechanics, various of these parts may be missing and may lead to poor/non-filtration or leaks, .......but they are all easily obtainable.
And don't forget the sealing ring which sits in a groove in the filter head!
Post Reply