petrol pumps

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
les
Minor Maniac
Posts: 9679
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Post by les »

Can any members help with some info? I am rebuilding a couple of SU pumps and on the main body near the bottom flange, one of them has an outlet about 5/16 diameter and 5/16 long shaped to grip a plastic pipe could this be a breather or linked to somewhere?
Top
stephen
Minor Friendly
Posts: 15
Joined: Tue Feb 12, 2002 12:00 am
Location: Brisbane, Queensland
MMOC Member: No

Post by stephen »

Maybe I'm misunderstanding your post, but isn't that where the Filter goes?
Top
les
Minor Maniac
Posts: 9679
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Post by les »

It's not the filter housing.The item in question protrudes from the steel body at an angle.
les
Top
ianedwards25
Newbie
Posts: 2
Joined: Mon Feb 11, 2002 12:00 am
MMOC Member: No

Post by ianedwards25 »

Yes it sounds like it is a breather the S/U pump has been used on lots of difrent cars some had a breather pipe on the maine body of the pump (the steel bit) mostley found on minis/1100/1300 and some C type jags [ This Message was edited by: ianedwards25 on 14-02-2002 22:56 ]
Top
Post Reply

Return to “Mechanical”