scrapyard hunt

[ohc_turbo]

Hi, im going to be going on a scrapyard hunt for a gearbox and a escort rear axel, the question is what modle sierra do i have to find to get the g/box off of it and what modle escort mk2 can i get the rear axel from, can it be from a bog standard 1.3 or does it have to be off of a 1.6 or higher spec?

cheers

[Cam]

Pretty much any 5-speed 1.6 Sierra will do (LOADS in the scrapyards). Make sure it's got the removable bell-housing though.

Escort axle is MUCH more difficult though........... I seriously doubt you'll find one, so you won't be able to choose 1.3 or 1.6. I think they are the same axle, just a different ratio. You might want to get RS2000 halfshafts (like mine) but you won't be finding them in a scrapyard!

[ohc_turbo]

youre right, finding a rs2000 would be a rare find, might be a few 1.3's or 1.6's though dotted around.

is it tru then all i need is a fitting kit for these two parts and im pretty sorted out

[Wal]

Hi,
if you are able to find one I think you'll find that the 1.3 escort back axle has smaller drum brakes than the 1.6, though this might only have been the Ghia version.

Also just be careful with the Sierra box because the diesel and 2.8, 2.9 and V6 models had a long input shaft about 8.1 inches from the front gearbox face and different front covers

The 1.6, 1.8 and 2.0 petrol models had the short input shaft, about 6.9 inches from the front face of the gearbox, which is the probably the best one for the Minor.

Regards,
Wal

[Cam]

youre right, finding a rs2000 would be a rare find, might be a few 1.3's or 1.6's though dotted around.

is it tru then all i need is a fitting kit for these two parts and im pretty sorted out

Not as such, no. You'll need to weld some new spring mountings to the axle after grinding the escort ones off, plus you'll need to get a custom prop built.

Can't think of anything else at the mo............

[bigginger]

What about turreting the rear for the shocks (oh, alright, dampers...)

[Cam]

Yes, and improving all the other suspension bits and putting disc brakes on the front would be good too!