Been spending the last week or so on the wiring, everything except the front lights (and engine circuits) is now fitted and working, had a few problems,
-washer pump connections wrong way round,
-missed lower connection on horn and pushed both on what turns out is the same connection (proves fusing works!)
-missed the earth wire off the heater
-Indicators don't flash, not sure if it is because the fronts are missing or relay is kaput but easy enough to fix later.
Attached is the new wiring diagram in case it is of interest to anyone, Tacho, temperature gauge, centre rear stop lamp and brake fluid level warning light will be added later but wiring is there anyway. I have also laid a spare cable to the rear in case we decide we want fog or reversing lights and at some point we will need to think about a 12V power feed and radio, but there are plenty of spare fuses to feed these from when we get round to it, current plan is to get it on the road and worry about these non essential items afterwards.
The original temperature warning light may also have to go to get a sensor for the gauge in unless anyone has come up with a better idea.
![Capture wiring.jpg](./download/file.php?id=1440&sid=d50f2eb8c43d33acb66812c75e180303)
- Capture wiring.jpg (110.79 KiB) Viewed 4771 times